[uClinux-dev] [PATCH 04/11] m68knommu: use definitions for the ColdFire 528x FEC multi-function pins

gerg at snapgear.com gerg at snapgear.com
Fri Sep 21 02:51:06 EDT 2012


From: Greg Ungerer <gerg at uclinux.org>

Currently the setup code for the FEC multi-function pins on the ColdFire 528x
has the addresses hard coded in the code. Use the register defines that
already exist for this.

Signed-off-by: Greg Ungerer <gerg at uclinux.org>
---
 arch/m68k/platform/coldfire/m528x.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c
index f1319e5..f9f7e6a 100644
--- a/arch/m68k/platform/coldfire/m528x.c
+++ b/arch/m68k/platform/coldfire/m528x.c
@@ -53,9 +53,9 @@ static void __init m528x_fec_init(void)
 	u16 v16;
 
 	/* Set multi-function pins to ethernet mode for fec0 */
-	v16 = readw(MCF_IPSBAR + 0x100056);
-	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
-	writeb(0xc0, MCF_IPSBAR + 0x100058);
+	v16 = readw(MCFGPIO_PASPAR);
+	writew(v16 | 0xf00, MCFGPIO_PASPAR);
+	writeb(0xc0, MCFGPIO_PEHLPAR);
 }
 
 /***************************************************************************/
-- 
1.7.0.4



More information about the uClinux-dev mailing list