[uClinux-dev] Unable to compile uclinux-dist, arm-linux-gcc:Command not found

Greg Ungerer gerg at snapgear.com
Tue Jun 16 02:48:01 EDT 2009


Hi Jim,

robinsonj at welchallyn.com wrote:
> Did you install patch and dofrodos packages?

I don't follow?


> I had issues when I didn't 
> have them install under Kubuntu 810, even if you have the 
> build-essentials loaded.
> Also I found that /bin/sh pointed to dash, and I loaded bash and 
> restored the /bin/sh link to that.

That shouldn;t be a problem in any modern uClinux-dist.
Of course older source packages will have this and many
other problems...

Regards
Greg



> *Peter Weichai <peterweichai at yahoo.com>*
> Sent by: uclinux-dev-bounces at uclinux.org
> 
> 06/11/2009 08:45 AM
> Please respond to
> uClinux development list <uclinux-dev at uclinux.org>
> 
> 
> 	
> To
> 	Greg Ungerer <gerg at snapgear.com>
> cc
> 	uclinux-dev at uclinux.org
> Subject
> 	[uClinux-dev] Unable to compile uclinux-dist,       
>  arm-linux-gcc:Command not found
> 
> 
> 	
> 
> 
> 
> 
> 
> Hi Greg,
> 
> Thanks for replying. I generated it myself and later on
> used a pre-built binary toolchain, which installed into
> standard path like /usr/local/arm-elf/bin.
> 
> I tried to compile the uclinux-dist many times with fresh installtions 
> by following alot of guides which i found from internet, i always
> ended up with errors.
> 
> For example:
> I'm using Ubuntu 8.10, and i installed
> - arm-elf-tools-20040427.sh
> - uClinux-dist-20040408.tar.gz with linux-2.6.5-hsc2.patch.gz
> 
> by following the guide in
> http://opensrc.sec.samsung.com/document/Getting_Familiar_with_uClinuxARM2_6.html
> 
> but i ended up with error as below:
> 
> mconf.c:91: error: static declaration of 'current_menu' follows 
> non-static declaration
> scripts/kconfig/lkc.h:63: error: previous declaration of 'current_menu' 
> was here
> scripts/kconfig/mconf.c: In function 'exec_conf':
> scripts/kconfig/mconf.c:225: warning: ignoring return value of 'pipe', 
> declared with attribute warn_unused_result
> scripts/kconfig/mconf.c: In function 'show_textbox':
> scripts/kconfig/mconf.c:553: warning: ignoring return value of 'write', 
> declared with attribute warn_unused_result
> make[3]: *** [scripts/kconfig/mconf.o] Error 1
> make[2]: *** [silentoldconfig] Error 2
> make[1]: *** [include/linux/autoconf.h] Error 2
> 
> 
> Any idea or any hint on which stable package to use?
> 
> Thanks
> 
> 
> 
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
> To unsubscribe see:
> http://mailman.uclinux.org/mailman/options/uclinux-dev

-- 
------------------------------------------------------------------------
Greg Ungerer  --  Principal Engineer        EMAIL:     gerg at snapgear.com
SnapGear Group, McAfee                      PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com



More information about the uClinux-dev mailing list