[uClinux-dev] new uClinux-dist patch

Jim Donelson uclinux at jimdonelson.com
Tue Jun 9 22:03:03 EDT 2009


Yes, and I am two patches behind, but I will catch up over the next few days
(that how slow the download speeds are).

On Tue, Jun 9, 2009 at 8:39 PM, Greg Ungerer <gerg at snapgear.com> wrote:

> Hi Jeff,
>
> Jeff Bacon wrote:
>
>>  Quick question. If I want to apply the newest stable patch-set to
>> the base 888 kernel tree, should I only stick with the patch set that
>> is on Sourceforge, or are the ones on the uClinux.org site just as
>> stable(i.e. the one you just uploaded)?
>>
>
> They are the same. The sourceforge files are copied from uclinux.org.
> Jim Donelson takes the image I put on uclinux.org and copies them
> to sourceforge. I don't have any access to what goes onto sourceforge
> myself.
>
>
>  I've noticed that the
>> Sourceforge site does not have the last few patch-sets and I'm just
>> wondering if there is a reason for that (or is it just that no one has
>> gotten around to uploading the new patches to Sourceforge?).
>>
>
> Basically yes, that is right. I pinged Jim to copy them over,
> but got no response.
>
> Regards
> Greg
>
>
>
>
>  On Thu, May 21, 2009 at 2:53 AM, Greg Ungerer <gerg at snapgear.com> wrote:
>>
>>> Hi All,
>>>
>>> I have started an upload of a new uClinux-dist patch, at:
>>>
>>>
>>> http://www.uclinux.org/pub/uClinux/dist/patches/uClinux-dist-20080808-20090520.patch.gz
>>>
>>> It won't all be there for probably about 24 hours. So hold of
>>> downloading 'till tomorrow :-)
>>>
>>> It includes a linux-2.6.29 kernel, and other various fixes and
>>> source updates - nothing major. I think most targets work as well
>>> as the did with the 2.6.26 kernel in there. (Excepting ARMulator
>>> I think, I haven't had time to look at it yet).
>>>
>>> As usual please post any patches and fixes here. (I may be a
>>> little slow in responding for the next couple of weeks, I'll be
>>> away).
>>>
>>> I haven't released a linux-2.6.29-uc0 patch set as I normally would.
>>> Instead I have been pushing my changes into the git tree at:
>>>
>>> git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git
>>>
>>> And then promoting them from there. Means less work for me :-)
>>> But, are people attached to using the -uc patch series?
>>> Does anyone still want me to create them?
>>>
>>> So far in that git tree in the "for-linus" branch is a set of
>>> changes to clean up the various ColdFire reset/reboot code, it should
>>> work much better on all platforms now.
>>>
>>> There is some more merged include file cleanups in the "includes"
>>> branch.
>>>
>>> The biggest changes in that git tree and some interrupt controller
>>> improvements I am working on. There is now specific support code
>>> for each of the various types of interrupt controllers used in
>>> the various ColdFire parts. The support for the new parts with the
>>> larger more flexible interrupt controllers is clean and nice (so
>>> for 5208, 5235, 5271/5275, 5282, 5329 and their type). The code
>>> for the older parts (5206, 5249, 5307, 5407, etc) is better, but
>>> I am still working to improve it a little more.
>>>
>>> Regards
>>> Greg
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>> Greg Ungerer  --  Principal Engineer        EMAIL:     gerg at snapgear.com
>>> SnapGear Group, McAfee                      PHONE:       +61 7 3435 2888
>>> 825 Stanley St,                             FAX:         +61 7 3891 3630
>>> Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
>>> _______________________________________________
>>> uClinux-dev mailing list
>>> uClinux-dev at uclinux.org
>>> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
>>> This message was resent by uclinux-dev at uclinux.org
>>> To unsubscribe see:
>>> http://mailman.uclinux.org/mailman/options/uclinux-dev
>>>
>>>  _______________________________________________
>> uClinux-dev mailing list
>> uClinux-dev at uclinux.org
>> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
>> This message was resent by uclinux-dev at uclinux.org
>> To unsubscribe see:
>> http://mailman.uclinux.org/mailman/options/uclinux-dev
>>
>>
> --
> ------------------------------------------------------------------------
> Greg Ungerer  --  Principal Engineer        EMAIL:     gerg at snapgear.com
> SnapGear Group, McAfee                      PHONE:       +61 7 3435 2888
> 825 Stanley St,                             FAX:         +61 7 3891 3630
> Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
> To unsubscribe see:
> http://mailman.uclinux.org/mailman/options/uclinux-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.uclinux.org/pipermail/uclinux-dev/attachments/20090609/b3ccbbd6/attachment.html>


More information about the uClinux-dev mailing list