[uClinux-dev] [patch] for 2.6.24 give the following when attempting to do menuconfig for ARM

[Robert Warner]

Hi Greg,

>> After successfully applying the linux2.6.24-uc0.patch.gz, e.g. no 
>> errors reported by patch.  Then attempt to run:
>> make ARCH=arm CROSS_COMPILE=arm-linux- menuconfig
>> and get the following error.
> 
> This patch is very much setup as a "drop-in" replacement
> for the kernel within the uClinux-dist build framework.
I may be misunderstanding something here.  Do i apply the patch to a 
Linux 2.6.24 kernel tree from kernel.org?  Or, do i apply the patch at 
the uCLinux-dist/linux-2.6.x directory?  From the FAQ sounds like the 
first choice.  Then after i apply the patch should i move/copy/link the 
new kernel to the uCLinux-dist/linux-2.6.x area?

> 
> So it is referencing the external openswan package in this case.
> Just remove that "source" line from net/Kconfig.
I noticed the openswan is in the uCLinux-dist.

I've seen an article reference of http://www.snapgear.com/tb20020807.html
but i can;t seem to locate it.  I think it might help my learning curve. 
Do you know it it might be archived somewhere?

tia - bob


also
http://www.ucdot.org/article.pl?sid=02/09/03/1357255 referenced above 
article

and
http://www.uclinux.org/get_started/uClinuxbeginner.html#_contents
have helped but leave some gaps
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rwarner.vcf
Type: text/x-vcard
Size: 369 bytes
Desc: not available
Url : http://mailman.uclinux.org/pipermail/uclinux-dev/attachments/20080208/4cdf1470/rwarner.bin