[uClinux-dev] [patch] for 2.6.24 give the following when attempting to do menuconfig for ARM

[Greg Ungerer]

Hi Robert,

Robert Warner wrote:
> After successfully applying the linux2.6.24-uc0.patch.gz, e.g. no errors 
> reported by patch.  Then attempt to run:
> make ARCH=arm CROSS_COMPILE=arm-linux- menuconfig
> and get the following error.

This patch is very much setup as a "drop-in" replacement
for the kernel within the uClinux-dist build framework.

So it is referencing the external openswan package in this case.
Just remove that "source" line from net/Kconfig.

Regards
Greg



> tia - bob
> 
> ...
> patching file scripts/kconfig/Makefile
> patching file scripts/Makefile.modinst
> patching file scripts/Makefile.modpost
> root at Larry:/usr/src/linux-2.6.24# make ARCH=arm CROSS_COMPILE=arm-linux- 
> menuconfig
>   HOSTCC  scripts/basic/fixdep
>   HOSTCC  scripts/basic/docproc
>   HOSTCC  scripts/kconfig/conf.o
>   HOSTCC  scripts/kconfig/kxgettext.o
>   HOSTCC  scripts/kconfig/lxdialog/checklist.o
>   HOSTCC  scripts/kconfig/lxdialog/inputbox.o
>   HOSTCC  scripts/kconfig/lxdialog/menubox.o
>   HOSTCC  scripts/kconfig/lxdialog/textbox.o
>   HOSTCC  scripts/kconfig/lxdialog/util.o
>   HOSTCC  scripts/kconfig/lxdialog/yesno.o
>   HOSTCC  scripts/kconfig/mconf.o
>   SHIPPED scripts/kconfig/zconf.tab.c
>   SHIPPED scripts/kconfig/lex.zconf.c
>   SHIPPED scripts/kconfig/zconf.hash.c
>   HOSTCC  scripts/kconfig/zconf.tab.o
>   HOSTLD  scripts/kconfig/mconf
> scripts/kconfig/mconf arch/arm/Kconfig
> net/Kconfig:224: can't open file "../openswan/linux/net/ipsec/Kconfig"
> make[1]: *** [menuconfig] Error 1
> make: *** [menuconfig] Error 2
> root at Larry:/usr/src/linux-2.6.24#
> 
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
> To unsubscribe see:
> http://mailman.uclinux.org/mailman/options/uclinux-dev

-- 
------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     gerg at snapgear.com
Secure Computing Corporation                PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com