April 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Apr 1 08:10:16 EDT 2008
Ending: Wed Apr 30 19:01:54 EDT 2008
Messages: 494

• [uClinux-dev] Using flashw - how to?   Bob Grimes
  • [uClinux-dev] Using flashw - how to?   Phil Wilshire
    • [uClinux-dev] Using flashw - how to?   Bob Grimes
      • [uClinux-dev] Using flashw - how to?   Phil Wilshire
      • [uClinux-dev] Using flashw - how to?   Phil Wilshire
      • [uClinux-dev] Using flashw - how to?   Bob Grimes
      • [uClinux-dev] Using flashw - how to?   Bob Grimes
      • [uClinux-dev] YAFFS works in M5329EVB uClinux BSP?   Allen Yang
      • [uClinux-dev] YAFFS works in M5329EVB uClinux BSP?   Andrew Webster
    • [uClinux-dev] Using flashw - how to?   Greg Ungerer
      • [uClinux-dev] Using flashw - how to?   David McCullough
      • [uClinux-dev] Using flashw - how to?   Bob Grimes
      • [uClinux-dev] Using flashw - how to?   Greg Ungerer
• [uClinux-dev] compiliation problem in U-boot for blackfin in fedora 7   dinesh babu
  • [uClinux-dev] Re: [U-Boot-Users] compiliation problem in U-boot for blackfin in fedora 7   Mike Frysinger
• [uClinux-dev] ping skyeye   souhail sou
• [uClinux-dev] pthreads, vfork and signals   Xin Xie
  • [uClinux-dev] pthreads, vfork and signals   Mike Frysinger
• [uClinux-dev] pthreads, vfork and signals   Jamie Lokier
  • [uClinux-dev] pthreads, vfork and signals   Xin Xie
    • [uClinux-dev] pthreads, vfork and signals   Jamie Lokier
      • [uClinux-dev] pthreads, vfork and signals   Mike Frysinger
      • [uClinux-dev] pthreads, vfork and signals   Jamie Lokier
• [uClinux-dev] pthreads, vfork and signals   Mike Frysinger
• [uClinux-dev] Starting ths same program multiple times   Greg Ungerer
  • [uClinux-dev] Starting ths same program multiple times   Gavin Lambert
    • [uClinux-dev] Starting ths same program multiple times   Greg Ungerer
      • [uClinux-dev] Starting ths same program multiple times   Gavin Lambert
      • [uClinux-dev] Starting ths same program multiple times   Greg Ungerer
    • [uClinux-dev] Starting ths same program multiple times   Jamie Lokier
      • [uClinux-dev] Starting ths same program multiple times   Michael Schnell
  • [uClinux-dev] Starting ths same program multiple times   Michael Schnell
  • [uClinux-dev] Starting ths same program multiple times   Michael Schnell
• [uClinux-dev] uClinux and hardware watchdog - any hints?   Wolfgang Wegner
  • [uClinux-dev] uClinux and hardware watchdog - any hints?   Wolfgang Wegner
    • [uClinux-dev] uClinux and hardware watchdog - any hints?   Wolfgang Wegner
      • [uClinux-dev] uClinux and hardware watchdog - any hints?   Wolfgang Wegner
• [uClinux-dev] Need help configuring new platform   Remco Poelstra
  • [uClinux-dev] Need help configuring new platform   Vitaly Demyanec
    • [uClinux-dev] Did anybody make YAFFS work in uClinux?   Allen Yang
    • [uClinux-dev] Need help configuring new platform   Nitin Gupta
• [uClinux-dev] Re: [PATCH / RFC 0/2] spinlocks fixup in fec / m68knommu driver   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH / RFC 0/2] spinlocks fixup in fec / m68knommu driver   Greg Ungerer
• [uClinux-dev] Using gdb/gdbserver on m68knommu target   Markus Franke
  • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Harry Gunnarsson
  • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Chris Doré
    • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Markus Franke
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   David McCullough
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Markus Franke
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   David McCullough
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Markus Franke
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   David McCullough
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Markus Franke
      • [uClinux-dev] Using gdb/gdbserver on m68knommu target   Markus Franke
• [uClinux-dev] print application user stack   Teun Grinwis
  • [uClinux-dev] print application user stack   David McCullough
• [uClinux-dev] Third serial port on Freescale Coldfire mcv5329   Bob Grimes
  • [uClinux-dev] Third serial port on Freescale Coldfire mcv5329   Allen Yang
  • [uClinux-dev] Third serial port on Freescale Coldfire mcv5329   Wolfgang Wegner
    • [uClinux-dev] Third serial port on Freescale Coldfire mcv5329   Bob Grimes
• [uClinux-dev] initramfs and bflt on at91sam9260   Mike Sander
  • [uClinux-dev] initramfs and bflt on at91sam9260   Greg Ungerer
    • [uClinux-dev] initramfs and bflt on at91sam9260   Mike Sander
      • [uClinux-dev] initramfs and bflt on at91sam9260   Greg Ungerer
• [uClinux-dev] Debug information in vmlinux build & printk output location.   rwarner
  • [uClinux-dev] Debug information in vmlinux build & printk output location.   Greg Ungerer
    • [uClinux-dev] Debug information in vmlinux build & printk output location.   rwarner
      • [uClinux-dev] Debug information in vmlinux build & printk output location.   Greg Ungerer
• [uClinux-dev] [PATCH 0/5] fixup locking on m68knommu fec   Sebastian Siewior
  • [uClinux-dev] [PATCH 1/5] fec: kill warnings   Sebastian Siewior
    • [uClinux-dev] Re: [PATCH 1/5] fec: kill warnings   Greg Ungerer
      • [uClinux-dev] Re: [PATCH 1/5] fec: kill warnings   Sebastian Siewior
      • [uClinux-dev] Re: [PATCH 1/5] fec: kill warnings   Greg Ungerer
  • [uClinux-dev] Re: [PATCH 0/5] fixup locking on m68knommu fec   Greg Ungerer
    • [uClinux-dev] Re: [PATCH 0/5] fixup locking on m68knommu fec   Sebastian Siewior
• [uClinux-dev] [PATCH 2/5] m68knommu: fec: small coding style cleanup   Sebastian Siewior
• [uClinux-dev] [PATCH 3/5] m68knommu: fec typedef a function   Sebastian Siewior
• [uClinux-dev] [PATCH 4/5] m68knommu: fec fixup locking   Sebastian Siewior
• [uClinux-dev] [PATCH 5/5] m68knommu: dont allocate unused interrupts   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH 5/5] m68knommu: dont allocate unused interrupts   Greg Ungerer
    • [uClinux-dev] Re: [PATCH 5/5] m68knommu: dont allocate unused interrupts   Sebastian Siewior
      • [uClinux-dev] Re: [PATCH 5/5] m68knommu: dont allocate unused interrupts   Greg Ungerer
• [uClinux-dev] Detecting a USB mass storage device   Kevin Fry
• [uClinux-dev] some questions about ARM9 on uClinux, performance and toolchains   Greg Ungerer
• [uClinux-dev] startup delay due to empty flash - where? (Coldfire)   Wolfgang Wegner
• [uClinux-dev] build problem in 20080305 with romfs dir   Wolfgang Wegner
• [uClinux-dev] MICROWINDOWS   Rafael Ottmann
  • [uClinux-dev] MICROWINDOWS   Wolfgang Mües
• [uClinux-dev] pthreads, vfork and signals   John Williams
• [uClinux-dev] Is there a delay function in uClinux?   Bob Furber
  • [uClinux-dev] Is there a delay function in uClinux?   Erwin Authried
• [uClinux-dev] setting up the network   kailash toshniwal
  • [uClinux-dev] setting up the network   Gavin Lambert
    • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   Gavin Lambert
      • [uClinux-dev] setting up the network   Jamie Lokier
      • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   David McCullough
      • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   Gavin Lambert
      • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   Jamie Lokier
      • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   Michael Schnell
    • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   Jamie Lokier
      • [uClinux-dev] setting up the network   Michael Schnell
      • [uClinux-dev] setting up the network   Michael Schnell
  • [uClinux-dev] setting up the network   Robin Getz
• [uClinux-dev] AW: Problems with FTP access   Heinrich Eynck
• [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   Wolfgang Wegner
  • [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   David McCullough
    • [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   Wolfgang Wegner
      • [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   David McCullough
      • [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   Wolfgang Wegner
      • [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   David McCullough
      • [uClinux-dev] waitqueues unreliable on coldfire/2.6.23-uc0?   Wolfgang Wegner
• [uClinux-dev] MTD and Spansion S29GL   Frederic.LAMBERT at fr.thalesgroup.com
• [uClinux-dev] Re: uClinux-dev Digest, Vol 60, Issue 4   yslin at scut.edu.cn
• [uClinux-dev] boa + cgi   David Wu
• [uClinux-dev] Need help configuring new platform   Kaushik karandikar
  • [uClinux-dev] Need help configuring new platform   Nitin Gupta
• [uClinux-dev] hello world LKM fails at MODPOST, can't find symtab   David van Geest
• [uClinux-dev] jffs2---mtd problem with SST39VF3201   yslin at scut.edu.cn
• [uClinux-dev] compiling linuxkernel with debuginfo on net+arm 50   michael.knoppik at wago.com
  • [uClinux-dev] compiling linuxkernel with debuginfo on net+arm 50   Greg Ungerer
• [uClinux-dev] error sending mails zo uclinux-dev   michael.knoppik at wago.com
  • [uClinux-dev] error sending mails zo uclinux-dev   Gregg Levine
• [uClinux-dev] [PATCH] nios2: add elf2flt to configure options for apps   Thomas Chou
  • [uClinux-dev] [PATCH] nios2: add elf2flt to configure options for apps   David McCullough
    • [uClinux-dev] [PATCH] nios2: add elf2flt to configure options for apps   Thomas Chou
  • [uClinux-dev] [PATCH] nios2: add elf2flt to configure options for apps   Mike Frysinger
    • [uClinux-dev] [PATCH] nios2: add elf2flt to configure options for apps   David McCullough
      • [uClinux-dev] [PATCH] nios2: add elf2flt to configure options for apps   Mike Frysinger
• [uClinux-dev] Setting the IP Address   kailash toshniwal
  • [uClinux-dev] Setting the IP Address   David McCullough
• [uClinux-dev] Another question about spi and coldfire   Marcin Baranski
• [uClinux-dev] GDB Server   Kieran Bingham
• [uClinux-dev] GDB Server   Kieran Bingham
  • [uClinux-dev] GDB Server   Markus Franke
    • [uClinux-dev] GDB Server   Markus Franke
      • [uClinux-dev] GDB Server   Kieran Bingham
    • [uClinux-dev] GDB Server   Kieran Bingham
      • [uClinux-dev] GDB Server   Markus Franke
      • [uClinux-dev] GDB Server   Kieran Bingham
      • [uClinux-dev] GDB Server   Markus Franke
      • [uClinux-dev] GDB Server   Kieran Bingham
      • [uClinux-dev] GDB Server   Markus Franke
      • [uClinux-dev] GDB Server   Kieran Bingham
      • [uClinux-dev] GDB Server   Harry Gunnarsson
      • [uClinux-dev] GDB Server   Markus Franke
      • [uClinux-dev] GDB Server   Harry Gunnarsson
• [uClinux-dev] RE: MTD and Spansion S29GL   Frederic.LAMBERT at fr.thalesgroup.com
• [uClinux-dev] [RFC 00/11] [RFC 00/11] generic irq & generic time updates, review fixups   Sebastian Siewior
• [uClinux-dev] [RFC 04/11] m68knommu: complete generic time   Sebastian Siewior
• [uClinux-dev] [RFC 05/11] Add Coldfire DMA Timer support   Sebastian Siewior
  • [uClinux-dev] [RFC 01/11] m68knommu: add pretty back strace v2   Sebastian Siewior
  • [uClinux-dev] [RFC 02/11] fec: kill warnings   Sebastian Siewior
  • [uClinux-dev] [RFC 03/11] m68knommu: move code within time.c   Sebastian Siewior
  • [uClinux-dev] [RFC 06/11] m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS support   Sebastian Siewior
    • [uClinux-dev] Re: [RFC 01/11] m68knommu: add pretty back strace v2   Greg Ungerer
      • [uClinux-dev] Re: [RFC 01/11] m68knommu: add pretty back strace v2   Sebastian Siewior
      • [uClinux-dev] Re: [RFC 01/11] m68knommu: add pretty back strace v2   Greg Ungerer
  • [uClinux-dev] [RFC 08/11] m68knommu: use generic IRQ with a irq-chip   Sebastian Siewior
  • [uClinux-dev] [RFC 09/11] m68knommu: dont touch the irq controler in the FEC driver   Sebastian Siewior
  • [uClinux-dev] [RFC 10/11] m68knommu: dont touch the irq controler in the mcfserial driver   Sebastian Siewior
  • [uClinux-dev] [RFC 11/11] m68knommu: dont touch the irq controler in the pit driver   Sebastian Siewior
    • [uClinux-dev] [RFC] m68knommu: dont touch the irq controler in the mcfserial driver (v2)   Sebastian Siewior
      • [uClinux-dev] Re: [RFC] m68knommu: dont touch the irq controler in the mcfserial driver (v2)   Greg Ungerer
      • [uClinux-dev] Re: [RFC] m68knommu: dont touch the irq controler in the mcfserial driver (v2)   Sebastian Siewior
      • [uClinux-dev] Re: [RFC] m68knommu: dont touch the irq controler in the mcfserial driver (v2)   Greg Ungerer
  • [uClinux-dev] [RFC] Add Coldfire DMA Timer support v3 (contains brown paper bag fix)   Sebastian Siewior
• [uClinux-dev] [RFC 07/11] coldfire add support for kernel preemption   Sebastian Siewior
• [uClinux-dev] Web page opening problem   kailash toshniwal
• [uClinux-dev] [PATCH] nios2: add ucfront   Thomas Chou
  • [uClinux-dev] [PATCH] nios2: add ucfront   David McCullough
    • [uClinux-dev] [PATCH] nios2: add ucfront   Thomas Chou
• [uClinux-dev] [PATCH]uClinux patch for NXP LPC288x   Lucy Wang
  • [uClinux-dev] [PATCH]uClinux patch for NXP LPC288x   Lucy Wang
• [uClinux-dev] [PATCH] nios2: fix ioremap nocache   Thomas Chou
  • [uClinux-dev] [PATCH] nios2: flush data cache with address matching   Thomas Chou
    • [uClinux-dev] [PATCH] nios2: flush data cache with address matching   Greg Ungerer
  • [uClinux-dev] [PATCH] nios2: fix ioremap nocache   Greg Ungerer
• [uClinux-dev] pppd crashes with too many open files   Wolf-Rüdiger Jürgens
  • [uClinux-dev] pppd crashes with too many open files   Wolf-Rüdiger Jürgens
    • [uClinux-dev] pppd crashes with too many open files   Bongani Hlope
  • [uClinux-dev] pppd crashes with too many open files   David McCullough
• [uClinux-dev] PM on at91sam9260   Mike Sander
• Fw: [uClinux-dev] [PATCH]uClinux patch for NXP LPC288x   Lucy Wang
• [uClinux-dev] [PATCH] add kconfig options for installing {mount, umount}.cifs   Mike Frysinger
  • [uClinux-dev] [PATCH] add kconfig options for installing {mount, umount}.cifs   David McCullough
• [uClinux-dev] usb driver ipodlinux   Daniel Adrianto
• [uClinux-dev] Lattice port and others   Ben Kinsella
  • [uClinux-dev] Lattice port and others   Robin Getz
    • [uClinux-dev] Lattice port and others   Jamie Lokier
      • [uClinux-dev] Lattice port and others   Ben Kinsella
      • [uClinux-dev] Lattice port and others   ADP
      • [uClinux-dev] Lattice port and others   Michael Schnell
      • [uClinux-dev] Lattice port and others   Michael Schnell
      • [uClinux-dev] Lattice port and others   Greg Ungerer
    • [uClinux-dev] Lattice port and others   Greg Ungerer
• [uClinux-dev] Can't run boa web sever!   kailash toshniwal
• [uClinux-dev] bluetooth in arm   Daniel Adrianto
• [uClinux-dev] uClinux for the AT91SAM7X-familiy   Bob Brusa
  • [uClinux-dev] uClinux for the AT91SAM7X-familiy   Greg Ungerer
• [uClinux-dev] execute in place - yes or no?   Bob Brusa
  • [uClinux-dev] execute in place - yes or no?   Remco Poelstra
  • [uClinux-dev] execute in place - yes or no?   Michael Schnell
    • [uClinux-dev] execute in place - yes or no?   Erwin Authried
    • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
    • [uClinux-dev] execute in place - yes or no?   Greg Ungerer
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   Erwin Authried
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   rwarner
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   rwarner
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   rwarner
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   rwarner
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Andrew Kohlsmith (lists)
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Greg Ungerer
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   Jamie Lokier
      • [uClinux-dev] execute in place - yes or no?   Michael Schnell
      • [uClinux-dev] execute in place - yes or no?   Stanislav Meduna
      • [uClinux-dev] execute in place - yes or no?   rwarner
      • [uClinux-dev] execute in place - yes or no?   Stanislav Meduna
      • [uClinux-dev] execute in place - yes or no?   rwarner
  • [uClinux-dev] execute in place - yes or no?   Greg Ungerer
• [uClinux-dev] [PATCH] bump up default stack size for samba apps   Mike Frysinger
  • [uClinux-dev] [PATCH] bump up default stack size for samba apps   Greg Ungerer
• [uClinux-dev] booting image.bin   Alberto Vélez Ortiz
• [uClinux-dev] [PATCH] match the default smb.conf path to configure   Mike Frysinger
  • [uClinux-dev] [PATCH] match the default smb.conf path to configure   David McCullough
    • [uClinux-dev] [PATCH] match the default smb.conf path to configure   Mike Frysinger
      • [uClinux-dev] [PATCH] match the default smb.conf path to configure   David McCullough
      • [uClinux-dev] [PATCH] match the default smb.conf path to configure   Mike Frysinger
      • [uClinux-dev] [PATCH] match the default smb.conf path to configure   David McCullough
• [uClinux-dev] (no subject)   Bob True
• [uClinux-dev] getting 'pid' error while running boa!   kailash toshniwal
  • [uClinux-dev] getting 'pid' error while running boa!   Gavin Lambert
• [uClinux-dev] [PATCH] add simple watchdog daemon   Mike Frysinger
  • [uClinux-dev] [PATCH] add simple watchdog daemon   Greg Ungerer
• [uClinux-dev] Script scope - where do I start them?   Joakim Wennergren
  • [uClinux-dev] Script scope - where do I start them?   David McCullough
• [uClinux-dev] Loadable Kernel Driver: M68NOMMU or M5249C3   Paul Romero
  • [uClinux-dev] Loadable Kernel Driver: M68NOMMU or M5249C3   David van Geest
    • [uClinux-dev] Loadable Kernel Driver: M68NOMMU or M5249C3   Allon Stern
• [uClinux-dev] How to limit the ethernet speet to 10 Mb on MPC5282 with RTL8201 ethernet controller   Bob True
• [uClinux-dev] UART uClinux Nios II   Igor Cerniava
  • [uClinux-dev] UART uClinux Nios II   David McCullough
• [uClinux-dev] kernel question on start_kernel debugging   rwarner
  • [uClinux-dev] kernel question on start_kernel debugging   rwarner
• [uClinux-dev] C++ ELF2FLT problems on Coldfire   Robert Gretta
  • [uClinux-dev] C++ ELF2FLT problems on Coldfire   Harry Gunnarsson
• [uClinux-dev] Arcturus uC5272 Coldfire   Nick Wagers
  • [uClinux-dev] Arcturus uC5272 Coldfire   David Wu
• [uClinux-dev] Samba -smbmount PROBLEM   Igor Cerniava
• [uClinux-dev] Re: booting image.bin   Alberto Vélez Ortiz
  • [uClinux-dev] Re: booting image.bin   rwarner
• [uClinux-dev] Cygwin Toolchain Install?   Robert Gretta
  • [uClinux-dev] Cygwin Toolchain Install?   Peter Turczak
  • [uClinux-dev] Cygwin Toolchain Install?   Peter Turczak
    • [uClinux-dev] Cygwin Toolchain Install?   Robert Gretta
• [uClinux-dev] XIP and .data section initialization   rwarner
  • [uClinux-dev] XIP and .data section initialization   rwarner
    • [uClinux-dev] XIP and .data section initialization   Erwin Authried
      • [uClinux-dev] XIP and .data section initialization   rwarner
      • [uClinux-dev] XIP and .data section initialization   Erwin Authried
      • [uClinux-dev] XIP and .data section initialization   rwarner
• [uClinux-dev] MCF5249: GPIO IRQ Detection   Paul Romero
  • [uClinux-dev] MCF5249: GPIO IRQ Detection   Greg Ungerer
• [uClinux-dev] Anyone can run AXFS on linux-2.4.x??   Michael.Kang
• [uClinux-dev] MAP_SHARED not completely supported on !MMU from ftpd   Martin Voss
  • [uClinux-dev] MAP_SHARED not completely supported on !MMU from ftpd   Jamie Lokier
• [uClinux-dev] Routing Problem (dst_cache overflow)   Glenn Henshaw
• [uClinux-dev] porting uClinux to STR912(ARM966E-S based) board   Sanjeet Kumar
• [uClinux-dev] uClinux on ARM9   emanuele bottegoni
  • [uClinux-dev] uClinux on ARM9   Marco Cavallini
• [uClinux-dev] uClinux on ARM9   emanuele bottegoni
  • [uClinux-dev] uClinux on ARM9   Marco Cavallini
• [uClinux-dev] how to receive mails   advan_xiang
  • [was-spam] [uClinux-dev] how to receive mails   rwarner
• [uClinux-dev] Kernel 2.6.25   Michael Schnell
  • [uClinux-dev] Kernel 2.6.25   rwarner
    • [uClinux-dev] Kernel 2.6.25   Jamie Lokier
      • [uClinux-dev] Kernel 2.6.25   rwarner
      • [uClinux-dev] Kernel 2.6.25   Greg Ungerer
      • [uClinux-dev] 2 partitions on M5329EVB NAND flash and JFFS2 doesn't work   Allen Yang
      • [uClinux-dev] 2 partitions on M5329EVB NAND flash and JFFS2 doesn't work   Matt Waddel
      • [uClinux-dev] 2 partitions on M5329EVB NAND flash and JFFS2doesn't work   Allen Yang
      • [uClinux-dev] 2 partitions on M5329EVB NAND flash and JFFS2doesn't work   Matt Waddel
      • [uClinux-dev] 2 partitions on M5329EVB NAND flash and JFFS2 doesn'twork   Allen Yang
    • [uClinux-dev] Kernel 2.6.25   Greg Ungerer
      • [uClinux-dev] Kernel 2.6.25   Jamie Lokier
      • [uClinux-dev] Kernel 2.6.25   Greg Ungerer
      • [uClinux-dev] Kernel 2.6.25   Jamie Lokier
      • [uClinux-dev] Kernel 2.6.25   Greg Ungerer
      • [uClinux-dev] Kernel 2.6.25   rwarner
      • [uClinux-dev] Kernel 2.6.25   Greg Ungerer
      • [uClinux-dev] Kernel 2.6.25   Michael Schnell
      • [uClinux-dev] Kernel 2.6.25   rwarner
      • [uClinux-dev] Kernel 2.6.25   Greg Ungerer
      • [uClinux-dev] Kernel 2.6.25   Michael Schnell
• [uClinux-dev] ftpd "LIST" does not work for me   Michael Schnell
  • [uClinux-dev] ftpd "LIST" does not work for me   Endre Bakka
    • [uClinux-dev] ftpd "LIST" does not work for me   Peter Turczak
      • [uClinux-dev] ftpd "LIST" does not work for me   Michael Schnell
  • [uClinux-dev] ftpd "LIST" does not work for me   Kieran Bingham
    • [uClinux-dev] ftpd "LIST" does not work for me   Michael Schnell
• [uClinux-dev] nested interrupts on m68knommu(Coldfire)   Markus Franke
  • [uClinux-dev] nested interrupts on m68knommu(Coldfire)   Greg Ungerer
    • [uClinux-dev] nested interrupts on m68knommu(Coldfire)   Markus Franke
• [uClinux-dev] getting error to create arm-linux toolchain   amol verule
  • [uClinux-dev] getting error to create arm-linux toolchain   Greg Ungerer
    • [uClinux-dev] getting error to create arm-linux toolchain   amol verule
• [uClinux-dev] m68k-uclinux-gcc version for 2.4.x kernel and user app.   Martin Voss
  • [uClinux-dev] m68k-uclinux-gcc version for 2.4.x kernel and user app.   Greg Ungerer
• [uClinux-dev] [PATCH] libgmp: add nios2 machine type   Thomas Chou
  • [uClinux-dev] [PATCH] nios2: fix data cache flush address range   Thomas Chou
    • [uClinux-dev] [PATCH] nios2: fix data cache flush address range   Greg Ungerer
  • [uClinux-dev] [PATCH] libgmp: add nios2 machine type   Greg Ungerer
• [uClinux-dev] [PATCH] busybox v1.10.1   Thomas Chou
• [uClinux-dev] who cause this ugly bug?   =?GBK?B?wunRqfLU?=
• [uClinux-dev] linking script with XIP   Alberto Vélez Ortiz
  • [uClinux-dev] linking script with XIP   Erwin Authried
  • [uClinux-dev] linking script with XIP   rwarner
    • [uClinux-dev] auto mount USB flash driver?   Allen Yang
      • [uClinux-dev] auto mount USB flash driver?   Bryan Wu
• Re: [uClinux-dev] Kernel 2.6.25   rwarner
• Re: [uClinux-dev] linking script with XIP   rwarner
• [uClinux-dev] SSH on Arcturus uC5272   Nick Wagers
• [uClinux-dev] socket binding error   kailash toshniwal
• [uClinux-dev] socket binding error   kailash toshniwal
  • [uClinux-dev] socket binding error   Glenn Henshaw
    • [uClinux-dev] socket binding error   kailash toshniwal
      • [uClinux-dev] socket binding error   David McCullough
      • [uClinux-dev] socket binding error   kailash toshniwal
      • [uClinux-dev] socket binding error   Gavin Lambert
• Re: [uClinux-dev] socket binding error   Glenn Henshaw
• Re: [uClinux-dev] socket binding error   kailash toshniwal
• Re: [uClinux-dev] socket binding error   David McCullough
• Re: [uClinux-dev] socket binding error   kailash toshniwal
• RE: [uClinux-dev] socket binding error   Gavin Lambert
• Re: [uClinux-dev] Kernel 2.6.25   Greg Ungerer
• Re: [uClinux-dev] nested interrupts on m68knommu(Coldfire)   Greg Ungerer
• Re: [uClinux-dev] [PATCH] libgmp: add nios2 machine type   Greg Ungerer
• Re: [uClinux-dev] [PATCH] nios2: fix data cache flush address range   Greg Ungerer
• Re: [uClinux-dev] m68k-uclinux-gcc version for 2.4.x kernel and userapp.   Greg Ungerer
• [uClinux-dev] Re: [RFC 01/11] m68knommu: add pretty back strace v2   Greg Ungerer
• [uClinux-dev] [PATCH] libgmp: add nios2 machine type (amended)   Thomas Chou
• [uClinux-dev] [PATCH] libgmp: add nios2 machine type (amended)   Thomas Chou
  • [uClinux-dev] [PATCH] libgmp: add nios2 machine type (amended)   Greg Ungerer
• Re: [uClinux-dev] [PATCH] libgmp: add nios2 machine type (amended)   Greg Ungerer
• [uClinux-dev] Re: [RFC 01/11] m68knommu: add pretty back strace v2   Sebastian Siewior
• [uClinux-dev] Re: [RFC 01/11] m68knommu: add pretty back strace v2   Greg Ungerer
• Re: [uClinux-dev] nested interrupts on m68knommu(Coldfire)   Markus Franke
• [uClinux-dev] My .25 proposal   Sebastian Siewior
• [uClinux-dev] My .25 proposal   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec: kill warnings   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec typedef a function   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: move code within time.c   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: complete generic time   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: add sched_clock() for the DMA timer   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: coldfire add support for kernel preemption   Sebastian Siewior
  • [uClinux-dev] [PATCH] generic: add OUTPUT_DATA_SECTION to vmlinux.lds.h   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: use generic vmlinux.lds.S.h   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: don't touch the irq controler in the FEC driver   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: don't touch the irq controler in the mcfserial driver   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: don't touch the irq controler in the pit driver   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: mcfserial, enable UART after IRQ line is availble   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: mcfserial add __init setup code   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: use one exist from execption   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: remove RPXCLASSIC from the m68k tree   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec: move some code around   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: FEC: replace the HAVE_mmi thing by the code itself   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec: remove FADS   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec: move mii_link_interrupt into its own IFDEF block.   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec: get rid of unused fec_phy_ack_intr()   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: fec: add __init a few times   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: add ffs and __ffs for plattform which support ISA A+   Sebastian Siewior
  • [uClinux-dev] [PATCH] m68knommu: add byteswap assembly opcode for ISA A+   Sebastian Siewior
  • [uClinux-dev] Re: My .25 proposal   Greg Ungerer
    • [uClinux-dev] Re: My .25 proposal   Sebastian Siewior
      • [uClinux-dev] Re: My .25 proposal   Greg Ungerer
• [uClinux-dev] [PATCH] m68knommu: mcfserial: piece from linux-2.6.24-uc0.patch   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: mcfserial: piece fromlinux-2.6.24-uc0.patch   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: update MAX_M68K_DMA_CHANNELS for some plattforms   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: update MAX_M68K_DMA_CHANNELS forsome plattforms   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH] m68knommu: update MAX_M68K_DMA_CHANNELS for some plattforms   Greg Ungerer
• [uClinux-dev] [PATCH] m68knommu: add some missing section into the lds script.   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: add some missing section into thelds script.   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH] m68knommu: add some missing section into the lds script.   Greg Ungerer
• [uClinux-dev] [PATCH] m68knommu: add pretty back strace   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: add pretty back strace   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: kill warnings   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: small coding style cleanup   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: small coding style cleanup   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec typedef a function   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: fixup locking   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: fixup locking   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH] m68knommu: fec: fixup locking   Greg Ungerer
    • [uClinux-dev] Re: [PATCH] m68knommu: fec: fixup locking   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: don't allocate unused interrupts   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: don't allocate unusedinterrupts   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: move code within time.c   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: complete generic time   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: Add Coldfire DMA Timer support   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: Add Coldfire DMA Timer support   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: add sched_clock() for the DMA timer   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS support   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTSsupport   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: add a missing backslash n in setup code   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: add a missing backslash n in setupcode   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: coldfire add support for kernelpreemption   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fix compare race in sched related code   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fix compare race in sched relatedcode   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH] m68knommu: fix compare race in sched related code   Greg Ungerer
• [uClinux-dev] [PATCH] generic: add OUTPUT_DATA_SECTION tovmlinux.lds.h   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: use generic vmlinux.lds.S.h   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: use generic IRQ with a irq-chip   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: use generic IRQ with a irq-chip   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: mcfserial,enable UART after IRQ line is availble   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: mcfserial add __init setup code   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: use one exist from execption   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: remove RPXCLASSIC from the m68ktree   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: move some code around   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: FEC: replace the HAVE_mmi thing bythe code itself   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: move mii_link_interrupt intoits own IFDEF block.   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: get rid of unusedfec_phy_ack_intr()   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: fec: add __init a few times   Sebastian Siewior
• [uClinux-dev] [PATCH] m68knommu: add byteswap assembly opcode forISA A+   Sebastian Siewior
• [uClinux-dev] [PATCH 1/5] open_eth: use basic mii regs and uncached buffer   Thomas Chou
• [uClinux-dev] [PATCH 1/5] open_eth: use basic mii regs and uncachedbuffer   Thomas Chou
  • [uClinux-dev] [PATCH 1/5] open_eth: use basic mii regs and uncached buffer   Greg Ungerer
• [uClinux-dev] [PATCH 2/5] open_eth: remove useless set_module_owner   Thomas Chou
• [uClinux-dev] [PATCH 2/5] open_eth: remove useless set_module_owner   Thomas Chou
  • [uClinux-dev] [PATCH 3/5] open_eth: add mii-tool support   Thomas Chou
    • [uClinux-dev] [PATCH 4/5] mii-tool: use kernel header mii.h   Thomas Chou
      • [uClinux-dev] [PATCH 5/5] open_eth: revert to use cached buffer   Thomas Chou
      • [uClinux-dev] [PATCH 5/5] open_eth: revert to use cached buffer   Greg Ungerer
    • [uClinux-dev] [PATCH 3/5] open_eth: add mii-tool support   Greg Ungerer
  • [uClinux-dev] [PATCH 2/5] open_eth: remove useless set_module_owner   Greg Ungerer
• [uClinux-dev] [PATCH 3/5] open_eth: add mii-tool support   Thomas Chou
• [uClinux-dev] [PATCH 4/5] mii-tool: use kernel header mii.h   Thomas Chou
• [uClinux-dev] [PATCH 5/5] open_eth: revert to use cached buffer   Thomas Chou
• [uClinux-dev] .config file Processor Type config values?   rwarner
  • [uClinux-dev] .config file Processor Type config values?   Greg Ungerer
  • [uClinux-dev] .config file Processor Type config values?   Erwin Authried
    • [uClinux-dev] .config file Processor Type config values?   rwarner
• [uClinux-dev] during do_initcalls() the call to uclinux_mtd_init is causing a data abort.   rwarner
  • [uClinux-dev] during do_initcalls() the call to uclinux_mtd_init is causing a data abort.   Greg Ungerer
    • [uClinux-dev] during do_initcalls() the call to uclinux_mtd_init is causing a data abort.   rwarner
• [uClinux-dev] Kernel panic ... <4> Internal error: Oop: 800 [#1]   rwarner
• [uClinux-dev] [PATCH]uClinux patch for NXP LPC288x   Greg Ungerer
• [uClinux-dev] [PATCH 2/5] open_eth: remove useless set_module_owner (amended)   Thomas Chou
  • [uClinux-dev] [PATCH 2/5] open_eth: remove useless set_module_owner (amended)   Greg Ungerer
• [uClinux-dev] Re: [RFC] m68knommu: dont touch the irq controler in the mcfserial driver (v2)   Greg Ungerer
  • [uClinux-dev] Re: [RFC] m68knommu: dont touch the irq controler in the mcfserial driver (v2)   Matt Waddel
• [uClinux-dev] IXP network problem   Ganesh Kumar
  • [uClinux-dev] IXP network problem   Vitaly Demyanec
  • [uClinux-dev] IXP network problem   Greg Ungerer
    • [uClinux-dev] IXP network problem   Ganesh Kumar
• [uClinux-dev] ARM940 cache flush routine   Lin KJ
• [uClinux-dev] Question about uclinux compilation error   =?GBK?B?y+/R0775?=
• [uClinux-dev] linking script with XIP   Alberto Vélez Ortiz
  • [uClinux-dev] linking script with XIP   rwarner
  • [uClinux-dev] linking script with XIP   Erwin Authried
• [uClinux-dev] ftp server without anonymous users   senitenmert at free.fr
  • [uClinux-dev] ftp server without anonymous users   Michael Schnell
    • [uClinux-dev] ftp server without anonymous users   senitenmert at free.fr
      • [uClinux-dev] ftp server without anonymous users   Michael Schnell
• [uClinux-dev] Some sent me an email with /.*DMA.*/ in Subject   Sebastian Siewior
• [uClinux-dev] linking script with xip   Alberto Vélez Ortiz
• [uClinux-dev] linking script with xip   Alberto Vélez Ortiz
• [uClinux-dev] User app stack usage profiling   Martin Voss
  • [uClinux-dev] User app stack usage profiling   Erwin Authried
    • [uClinux-dev] User app stack usage profiling   Harry Gunnarsson
      • [uClinux-dev] User app stack usage profiling   Erwin Authried
  • [uClinux-dev] User app stack usage profiling   Paul_Dale at au.securecomputing.com
• [uClinux-dev] [PATCH] m68knommu: Add info about removing mcfserial   Sebastian Siewior
  • [uClinux-dev] Re: [PATCH] m68knommu: Add info about removing mcfserial   Greg Ungerer

Last message date: Wed Apr 30 19:01:54 EDT 2008
Archived on: Thu May 1 11:30:05 EDT 2008

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...