October 2007 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Oct 1 10:53:43 EDT 2007
Ending: Wed Oct 31 17:48:25 EDT 2007
Messages: 273

• [uClinux-dev] The problem of OHCI driver for Winbond W90N740.   Darwin Chen
• [uClinux-dev] M5329evb usb & compact flash driver   Chris Gray
• [uClinux-dev] How to install multiple versions of Snapgear toolchain?   Dave Rensberger
• [uClinux-dev] Re: M5329evb usb & compact flash driver   Claude
• [uClinux-dev] insmod fails with Unknown symbol   chris brooke
• [uClinux-dev] insmod fails with Unknown symbol   Gavin Lambert
• [uClinux-dev] FW: insmod fails with Unknown symbol   chris brooke
• [uClinux-dev] insmod fails with Unknown symbol   Marty Leisner
• [uClinux-dev] insmod fails with Unknown symbol   Robin Getz
• [uClinux-dev] How to install multiple versions of Snapgear toolchain?   Doug Kehn
• [uClinux-dev] FW: insmod fails with Unknown symbol   Jamie Lokier
• [uClinux-dev] insmod fails with Unknown symbol   Gavin Lambert
• [uClinux-dev] Multiple channels on QSPI, using mcf_qspi.c driver   Bob Grimes
• [uClinux-dev] How to install multiple versions of Snapgear toolchain?   Greg Ungerer
• [uClinux-dev] Building 2.4 and 2.6 based distro with glibc from the same Snapgear package   Greg Ungerer
• [uClinux-dev] C++ exceptions, STLPort?   Stanislav Meduna
• [uClinux-dev] Can't get Ethernet over USB (USB gadget) to work   roger at bitfrost.no
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   Kazu Hirata
• [uClinux-dev] C++ exceptions, STLPort?   Gavin Lambert
• AW: [uClinux-dev] Multiple channels on QSPI, using mcf_qspi.c driver   Edgar Weigand
• [uClinux-dev] got signal 1!   Stefano Marini
• [uClinux-dev] error cross-compiling oRTP   Pello Otxandiano
• [uClinux-dev] insmod fails with Unknown symbol   Robin Getz
• [uClinux-dev] insmod fails with Unknown symbol   Robin Getz
• [uClinux-dev] insmod fails with Unknown symbol   Crane, Matthew
• [uClinux-dev] Upgrading to newer bridge-utils   glhs329 at gmail.com
• [uClinux-dev] insmod fails with Unknown symbol   Gregg Levine
• [uClinux-dev] Is the uClinux crowd aware of this? http://hri.sf.net   Gregg Levine
• [uClinux-dev] Is the uClinux crowd aware of this? http://hri.sf.net   Erwin Authried
• [uClinux-dev] insmod fails with Unknown symbol   Gavin Lambert
• [uClinux-dev] port of dhcpcd-3.1.6   Wilson Callan
• [uClinux-dev] 2 QSPI drivers for 5272?   chris brooke
• [uClinux-dev] 2 QSPI drivers for 5272?   Gavin Lambert
• [uClinux-dev] Weak symbols problem   Stanislav Meduna
• [uClinux-dev] sendto does not work, send and sendmsg do   Stanislav Meduna
• [uClinux-dev] Is the uClinux crowd aware of this? http://hri.sf.net   ulf kypke
• [uClinux-dev] Multiple channels on QSPI, using mcf_qspi.c driver   Bob Grimes
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Matt Waddel
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Crane, Matthew
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Gavin Lambert
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   David Wu
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Marty Leisner
• [uClinux-dev] [patch] add optional stub for libintl_dgettext()   Mike Frysinger
• [uClinux-dev] [patch] add optional stub for libintl_dgettext()   David McCullough
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   SIE
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   Erwin Authried
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   Stanislav Meduna
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   =?GB2312?B?wda35Q==?=
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   SIE
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   Stanislav Meduna
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Kristijan Lenac
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   David Wu
• [uClinux-dev] Eclipse Setup for remote Target debugging with m68k-bdm-elf-gdb   peter mutitika
• [uClinux-dev]error in make uClinux-Samsung   SIE
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Lance Spaulding
• [uClinux-dev] Eclipse Setup for remote Target debugging withm68k-bdm-elf-gdb   xavier.montagne
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   David Wu
• [uClinux-dev] Unreviewed patch   Kazu Hirata
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Josue de Freitas
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   David Wu
• [uClinux-dev] Kernel modules don't work on read-only filesystems ? (thanks)   Josue de Freitas
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   David McCullough
• [uClinux-dev] Kernel modules don't work on read-only filesystems ?   Marty Leisner
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   Marty Leisner
• [uClinux-dev] Upgrading to newer bridge-utils   Greg Ungerer
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   David McCullough
• [uClinux-dev] receive multicast ethernet frames on 5329   Christian Gieseler
• [uClinux-dev] about frame buffer   =?gb2312?B?s8K0z7vb?=
• [uClinux-dev] Enable the 3rd UART port on 5329EVB   Allen Yang
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   Robin Getz
• [uClinux-dev]problem of communicating between uClinux & uC/OS-II   Robin Getz
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   David McCullough
• [uClinux-dev] Enable the 3rd UART port on 5329EVB   Greg Ungerer
• [uClinux-dev]error in make uClinux-Samsung   Greg Ungerer
• [uClinux-dev] Upgrading to newer bridge-utils   Philip Craig
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   Robin Getz
• [uClinux-dev] how to upgrade the jffs2 of root in linux   advan
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   David McCullough
• [uClinux-dev] Support or patch for ARM str912   T.D.Kirkham at lboro.ac.uk
• [uClinux-dev] how to upgrade the jffs2 of root in linux   Nikita Tabatsky
• [uClinux-dev] how to upgrade the jffs2 of root in linux   Crane, Matthew
• [uClinux-dev] Upgrading to newer bridge-utils   glhs329 at gmail.com
• [uClinux-dev] do_initcalls() where is vmlinuz set up to populate between __initcall_start to end   John.Jeffers at bjservices.com
• [uClinux-dev] do_initcalls() where is vmlinuz set up to populate between __initcall_start to end   Mike Frysinger
• [uClinux-dev] how to upgrade the jffs2 of root in linux   advan
• [uClinux-dev] how to upgrade the jffs2 of root in linux   advan
• [uClinux-dev] how to upgrade the jffs2 of root in linux   Nikita Tabatsky
• [uClinux-dev] Sporadic hang on opening /dev/console   Wolf, Josef
• [uClinux-dev] receive multicast ethernet frames on 5329   Christian Gieseler
• [uClinux-dev] Sporadic hang on opening /dev/console   Phil Wilshire
• [uClinux-dev] how to upgrade the jffs2 of root in linux   Crane, Matthew
• [uClinux-dev] do_initcalls() where is vmlinuz set up to populate between __initcall_start to end   John.Jeffers at bjservices.com
• [uClinux-dev] receive multicast ethernet frames on 5329   Andrew Webster
• [uClinux-dev] tmpfs and share memory IPC support in uclinux 2.4.x?   Bin Liu
• [uClinux-dev] do_initcalls() where is vmlinuz set up to populate between __initcall_start to end   Phil Wilshire
• [uClinux-dev] do_initcalls() where is vmlinuz set up to populate between __initcall_start to end   John.Jeffers at bjservices.com
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   Robin Getz
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   Bernd Schmidt
• [uClinux-dev] how to upgrade the jffs2 of root in linux   advan
• AW: [uClinux-dev] Sporadic hang on opening /dev/console   Wolf, Josef
• AW: [uClinux-dev] Sporadic hang on opening /dev/console   Phil Wilshire
• [uClinux-dev] how to upgrade the jffs2 of root in linux   Crane, Matthew
• [uClinux-dev] Sporadic hang on opening /dev/console   Wolf, Josef
• [uClinux-dev] [patch] Support C++ in elf2flt.ld.   Bernd Schmidt
• [uClinux-dev] Problem with Memory in uClinux   An N. Ho
• [uClinux-dev] Problem with Memory in uClinux   Gavin Lambert
• [uClinux-dev] Problem with Memory in uClinux   Gavin Lambert
• [uClinux-dev] Problem with Memory in uClinux   Crane, Matthew
• No subject  
• No subject  
• [uClinux-dev] 2.4.x to 2.6.x flat loader changes   Jate Sujjavanich
• [uClinux-dev] 2.4.x to 2.6.x flat loader changes   David McCullough
• [uClinux-dev] 2.4.x to 2.6.x flat loader changes   Greg Ungerer
• [uClinux-dev] Sporadic hang on opening /dev/console   Greg Ungerer
• [uClinux-dev] got signal 1!   Greg Ungerer
• [uClinux-dev] Upgrading to newer bridge-utils   Philip Craig
• [uClinux-dev] how to upgrade the jffs2 of root in linux   advan
• [uClinux-dev] how to upgrade the jffs2 of root in linux   Phil Wilshire
• AW: [uClinux-dev] Sporadic hang on opening /dev/console   Wolf, Josef
• [uClinux-dev] Repository for 2.6.x   Jim Ramsay
• [uClinux-dev] Repository for 2.6.x   Jate Sujjavanich
• [uClinux-dev] Re: Repository for 2.6.x   Jim Ramsay
• [uClinux-dev] how to upgrade the jffs2 of root inlinux   Crane, Matthew
• [uClinux-dev] Sporadic hang on opening /dev/console   Detlef Vollmann
• [uClinux-dev] Does ucfront work with libstdc++.a?   kitefree
• [uClinux-dev] C++ support of ucfront-g++?   kitefree
• [uClinux-dev] Does ucfront work with libstdc++.a?   kitefree
• [uClinux-dev] C++ support of ucfront-g++?   kitefree
• [uClinux-dev] Does ucfront work with libstdc++.a?   Wolfgang Mües
• [uClinux-dev] Does ucfront work with libstdc++.a?   Erwin Authried
• [uClinux-dev] Does ucfront work with libstdc++.a?   kitefree
• [uClinux-dev] Does ucfront work with libstdc++.a?   Wolfgang Mües
• [uClinux-dev] Does ucfront work with libstdc++.a?   Erwin Authried
• [uClinux-dev] Does ucfront work with libstdc++.a?   Wolfgang Mües
• [uClinux-dev] Does ucfront work with libstdc++.a?   Erwin Authried
• [uClinux-dev] how to upgrade the jffs2 of root inlinux   advan
• [uClinux-dev] how to upgrade the jffs2 of root in linux   advan
• [uClinux-dev] Re: Repository for 2.6.x   John Williams
• [uClinux-dev] Re: Repository for 2.6.x   Greg Ungerer
• [uClinux-dev] Does ucfront work with libstdc++.a?   kitefree
• [uClinux-dev] mDNSResponder (bonjour) in 2.6.19 on coldfire   Rob Brown
• [uClinux-dev] Delay with CGI termination on Boa   1010904 at isep.ipp.pt
• [uClinux-dev] kgdb fails track break points   Xiaofeng Tan
• [uClinux-dev] Compile/Run Problems in uClinux (m68knommu, Coldfire)   Wolfgang Wegner
• [uClinux-dev] Need help : armulator   Nitin Gupta
• [uClinux-dev] kgdb fails track break points   Robin Getz
• [uClinux-dev] Does ucfront-g++ work with libstdc++.a?   kitefree
• [uClinux-dev] Compile/Run Problems in uClinux (m68knommu, Coldfire)   Wolfgang Wegner
• [uClinux-dev] Need help : armulator   Crane, Matthew
• [uClinux-dev] Does ucfront-g++ work with libstdc++.a?   David McCullough
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Robert P. J. Day
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Michael Schnell
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Robert P. J. Day
• [uClinux-dev] snmpd and telnetd problem   Andrey Kamchatnikov
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Patrice Kadionik
• [uClinux-dev] re: mDNSResponder (bonjour) in 2.6.19 on coldfire   Rob Brown
• [uClinux-dev] nios2: apparent I2C_GPIO-related patch error   Robert P. J. Day
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Michael Schnell
• [uClinux-dev] nios2 error: thread_info is now stack   Robert P. J. Day
• [uClinux-dev] USB Host on Freescale MCF5329EVB   Allen Yang
• [uClinux-dev] nios2 error: thread_info is now stack   Atle Nissestad
• [uClinux-dev] nios2 error: thread_info is now stack   Atle Nissestad
• [uClinux-dev] nios2 error: thread_info is now stack   Robert P. J. Day
• [uClinux-dev] nios2 error: thread_info is now stack   Robert P. J. Day
• [uClinux-dev] nios2: asm/scatterlist.h definitely needs some updating   Robert P. J. Day
• [uClinux-dev] USB Host on Freescale MCF5329EVB   Matt Waddel
• [uClinux-dev] USB Host on Freescale MCF5329EVB   Allen Yang
• [uClinux-dev] nios2: apparent I2C_GPIO-related patch error   Thomas Chou
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Thomas Chou
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Thomas Chou
• [uClinux-dev] nios2: asm/scatterlist.h definitely needs some updating   Thomas Chou
• [uClinux-dev] RE: Need help : armulator (Crane, Matthew)   Michael.Kang
• [uClinux-dev] any hardcode Altera Nios II geeks on this list?   Robert P. J. Day
• [uClinux-dev] net-snmp slow with kernel 2.6.x   Cedric MOLINIER
• [uClinux-dev] one more note about my nios2 patches for git kernel   Robert P. J. Day
• [uClinux-dev] Updated:Error opening framebuffer device/Unknown symbol   kaka
• [uClinux-dev] one more note about my nios2 patches for git kernel   David McCullough
• [uClinux-dev] New mirror in Europe   Sebastian Hess
• [uClinux-dev] FAT32 USB doesn't work   Claudia De Bartolomeis
• [uClinux-dev] problem memory region on arm boot   issam barouni
• [uClinux-dev] cache fault in coldfire 5282 design   Bernd Büttner
• [uClinux-dev] net-snmp slow with kernel 2.6.x   Crane, Matthew
• [uClinux-dev] one more note about my nios2 patches for git kernel   Robert P. J. Day
• [uClinux-dev] USB Host on Freescale MCF5329EVB   Jeffrey.Johnston at idealindustries.com
• [uClinux-dev] NIOS2: fixing include/asm/scatterist.h   Robert P. J. Day
• [uClinux-dev] nios2: apparent I2C_GPIO-related patch error   Robert P. J. Day
• [uClinux-dev] No boa or telnet response from Coldfire 5329 board.   Dennison, Eric
• [uClinux-dev] Updated:Error opening framebuffer device/Unknown symbol   Wolfgang Mües
• [uClinux-dev] NIOS2: dropping NIOS2-specific i2c-gpio stuff   Robert P. J. Day
• [uClinux-dev] NIOS2: is CONFIG_BLK_DEV_INITRD relevant here?   Robert P. J. Day
• [uClinux-dev] Colilo mirror   Uli Franke
• [uClinux-dev] USB Host on Freescale MCF5329EVB   Allen Yang
• [uClinux-dev] one more note about my nios2 patches for git kernel   David McCullough
• [uClinux-dev] one more note about my nios2 patches for git kernel   Robert P. J. Day
• [uClinux-dev] latest list of nios2 fixes/cleanups   Robert P. J. Day
• [uClinux-dev] one more note about my nios2 patches for git kernel   David McCullough
• [uClinux-dev] NIOS2: the adventure continues with missing DMA   Robert P. J. Day
• [uClinux-dev] latest list of nios2 fixes/cleanups   Michael Schnell
• [uClinux-dev] NIOS2: dropping NIOS2-specific i2c-gpio stuff   Michael Schnell
• [uClinux-dev] NIOS2: dropping NIOS2-specific i2c-gpio stuff   Robert P. J. Day
• [uClinux-dev] latest list of nios2 fixes/cleanups   Michael Schnell
• [uClinux-dev] latest list of nios2 fixes/cleanups   Robert P. J. Day
• [uClinux-dev] Boa: Add Interpreter support to bypass binfmt_misc requirement   Glenn Henshaw
• [uClinux-dev] latest list of nios2 fixes/cleanups   David McCullough
• [uClinux-dev] nios2 and ZONE_DMA Kconfig entry   Robert P. J. Day
• [uClinux-dev] nios2: how to update broken references to "sg->page"?   Robert P. J. Day
• [uClinux-dev] nios2 and ZONE_DMA Kconfig entry   Atle Nissestad
• [uClinux-dev] nios2 and ZONE_DMA Kconfig entry   Robert P. J. Day
• [uClinux-dev] nios2, scatterlists and non-coherent DMA iteration   Robert P. J. Day
• [uClinux-dev] nios2 needs an asm/kdebug.h file   Robert P. J. Day
• [uClinux-dev] nios2: need dma_release_declared_memory() and dma_declare_coherent_memory()   Robert P. J. Day
• [uClinux-dev] net-snmp compilation error   Jorge Staub
• [uClinux-dev] nios2: the last several patches, and being almost there   Robert P. J. Day
• [uClinux-dev] Problems with 2GB FAT16 SD/CF cards - resolved   Wolfgang Mües
• [uClinux-dev] uClinux port to Lattice's Mico32   ADP
• [uClinux-dev] problem memory region on arm boot   Greg Ungerer
• [uClinux-dev] cache fault in coldfire 5282 design   Greg Ungerer
• [uClinux-dev] latest list of nios2 fixes/cleanups   Greg Ungerer
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   Michael Schnell
• [uClinux-dev] [slightly OT] the proper git repo to support a processor port   Robert P. J. Day
• [uClinux-dev] embedded device ,mount problem   advan
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   ADP
• [uClinux-dev] Porting Linux programs to uClinux and other   Felipe Uderman
• [uClinux-dev] net-snmp slow with kernel 2.6.x   Cédric Molinier
• [uClinux-dev] Porting Linux programs to uClinux and other   Greg Ungerer
• [uClinux-dev] Porting Linux programs to uClinux and other   Gavin Lambert
• [uClinux-dev] [slightly OT] the proper git repo to support a processor port   Thomas Chou
• [uClinux-dev] Unknown Synbol:__gp_disp   kaka
• [uClinux-dev] Unknown Synbol:__gp_disp   kaka
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   Michael Schnell
• [uClinux-dev] Delay with CGI termination on Boa webserver   1010904 at isep.ipp.pt
• [uClinux-dev] Porting Linux programs to uClinux and other   Michael Schnell
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   Thomas Chou
• [uClinux-dev] net-snmp slow with kernel 2.6.x   Doug Kehn
• [uClinux-dev] [slightly OT] the proper git repo to support a processor port   Thomas Chou
• [uClinux-dev] [slightly OT] the proper git repo to support a processor port   Robert P. J. Day
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   ADP
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   ADP
• [uClinux-dev] Delay with CGI termination on Boa webserver   Chris Doré
• [uClinux-dev] Delay with CGI termination on Boa webserver   1010904 at isep.ipp.pt
• [uClinux-dev] net-snmp slow with kernel 2.6.x   Cedric MOLINIER
• [uClinux-dev] uClinux, uClibc, tool relationships   Chris Doré
• [uClinux-dev] Delay with CGI termination on Boa webserver   Cédric Molinier
• [uClinux-dev] [PATCH] Remove system dependencies from flthdr [-z]   Julian Brown
• [uClinux-dev] uClinux, uClibc, tool relationships   Jate Sujjavanich
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Felipe Uderman
• [uClinux-dev] Delay with CGI termination on Boa webserver   1010904 at isep.ipp.pt
• [uClinux-dev] uClinux, uClibc, tool relationships   Gavin Lambert
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Gavin Lambert
• [uClinux-dev] uClinux, uClibc, tool relationships   David McCullough
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   John Williams
• [uClinux-dev] uClinux port to Lattice's Mico32   Richard Klingler
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Jamie Lokier
• [uClinux-dev] Porting Linux programs to uClinux and other   Mike Frysinger
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Mike Frysinger
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Gavin Lambert
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   Michael Schnell
• [uClinux-dev] Unknown Synbol:__make_dp   kaka
• [uClinux-dev] [slightly OT] the proper git repo to support a processor port   Thomas Chou
• [uClinux-dev] uClinux port to Lattice's Mico32   ADP
• [uClinux-dev] netstat: Not Built   Paul Romero
• [uClinux-dev] uClinux, uClibc, tool relationships   Chris Doré
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Mike Frysinger
• [uClinux-dev] Re: Porting Linux programs to uClinux and other   Felipe Uderman
• *SPAM* [uClinux-dev] uClinux port to Lattice's Mico32   John Williams

Last message date: Wed Oct 31 17:48:25 EDT 2007
Archived on: Wed Oct 31 17:49:04 EDT 2007

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...