[uClinux-dev] do_initcalls() where is vmlinuz set up to populate between __initcall_start to end

[John.Jeffers at bjservices.com]

uclinux-dev-bounces at uclinux.org wrote on 2007-10-15 06:03:59 PM:

> On Monday 15 October 2007, John.Jeffers at bjservices.com wrote:
> > Yes I have puzzled through this and read a lot of material and code 
but
> > have not quite found this answer.
> 
> you're wondering how the initcall mechanism works and how to use it 
yourself ?
> -mike

Mike

Absolutely!

I see most of how the initcall mechanism works.  I have read through 
Christopher Hallinan's book, "Embedded Linux Primer" and followed the init 
thread
through ~/init/main.c and ~/include/init.h for ARM (he doesn't show a full 
working example, I guess you buy Montevista for that.)but am having no 
luck having the linker pick up the __setup_parameter macro by itself.

as in "static init __init bjcs_leds()".

I guess I need to rule out "is there a linker thing to do extra" seemingly 
not.
Do I have to have to have the module in a favorite place?
Did I screw up my syntax? (Highest probability!)

In your code on blackfin is there a good example?

Thanks John

(P.S. I have presented as 20/20 hindsight I should have taken your 
course.)