[uClinux-dev] Building uClinux kernel (2.6.19) for S3C4510b from scratch.

[Greg Ungerer]

Hi Surej,

Surej Antony Joseph wrote:
> Greg Ungerer wrote:
>> Surej Antony Joseph wrote:
>>>    I have attached my config file. One of the most occurred issue was 
>>> the removal of linux/config.h file. By using touch 
>>> include/linux/config.h fixed it. The compilation issues are given below:
>>
>> I have fixed most of these problems in more recent kernel patches.
>> Though my very most recent changes won't be in 2.6.23-uc0 (since that
>> is a little older now too).
>>
>> I could probably generate a 2.6.23-uc1 if you want to try something
>> newer out.
>>
>> Regards
>> Greg
> Hello Greg,
> 
>   It would be great if you can generate 2.6.23-uc1 patch.
>   Appreciate your support

Ok, I have put up a 2.6.23-uc1 patch set.
You can get them at the usual place:

http://www.uclinux.org/pub/uClinux/uClinux-2.6.x/linux-2.6.23-uc1-big.patch.gz
http://www.uclinux.org/pub/uClinux/uClinux-2.6.x/linux-2.6.23-uc1.patch.gz

Regards
Greg


------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     gerg at snapgear.com
Secure Computing Corporation                PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com