[uClinux-dev] 20071107: errors on altera target

[Thomas Chou]

We are maintaining patches on a git server at 
git://sopc.et.ntust.edu.tw/git/uClinux-dist.git . These patches will be 
submitted to this list after more tests.
Please refer to the thread on Nios forum, 
http://forum.niosforum.com/forum/index.php?showtopic=7811 ,
and the Nios wiki, http://nioswiki.jot.com/WikiHome/GitServer .

- Thomas

DMcLeod 提到:
> Using the new uClinux-dist release 20071107, the following error occurs:
> ...
> make[1]: Entering directory `/home/dmcleod/git/uClinux-dist/linux-2.6.x'
> CHK include/nios2_system.h
> perl 
> -I/home/dmcleod/git/uClinux-dist/linux-2.6.x/arch/nios2nommu/scripts 
> /home/dmcleod/git/uClinux-dist/linux-2.6.x/arch/nios2nommu/scripts/gen_nios2_system.h.pl 
> cpu_0 sdram_0 cfi_flash_0 < 
> /home/dmcleod/git/uClinux-dist/FIN_NIOS_T2.ptf > 
> include/nios2_system.h.tmp; if [ -r include/nios2_system.h ] && cmp -s 
> include/nios2_system.h include/nios2_system.h.tmp; then rm -f 
> include/nios2_system.h.tmp; else echo ' UPD include/nios2_system.h'; 
> mv -f include/nios2_system.h.tmp include/nios2_system.h; fi
> CHK include/linux/version.h
> CHK include/linux/utsrelease.h
> CALL scripts/checksyscalls.sh
> CHK include/linux/compile.h
> CC drivers/serial/altera_juart.o
> drivers/serial/altera_juart.c:350: error: `na_jtag_uart' undeclared 
> here (not in a function)
> drivers/serial/altera_juart.c:350: error: initializer element is not 
> constant
> drivers/serial/altera_juart.c:350: error: (near initialization for 
> `juart_ports[0].port.membase')
> drivers/serial/altera_juart.c:351: error: initializer element is not 
> constant
> drivers/serial/altera_juart.c:351: error: (near initialization for 
> `juart_ports[0].port.mapbase')
> drivers/serial/altera_juart.c:353: error: `na_jtag_uart_irq' 
> undeclared here (not in a function)
> drivers/serial/altera_juart.c:353: error: initializer element is not 
> constant
> drivers/serial/altera_juart.c:353: error: (near initialization for 
> `juart_ports[0].port.irq')
> drivers/serial/altera_juart.c:359: error: initializer element is not 
> constant
> drivers/serial/altera_juart.c:359: error: (near initialization for 
> `juart_ports[0].port')
> drivers/serial/altera_juart.c:360: error: initializer element is not 
> constant
> drivers/serial/altera_juart.c:360: error: (near initialization for 
> `juart_ports[0]')
> make[3]: *** [drivers/serial/altera_juart.o] Error 1
> make[2]: *** [drivers/serial] Error 2
> make[1]: *** [drivers] Error 2
> make[1]: *** Waiting for unfinished jobs....
> make[1]: *** wait: No child processes. Stop.
> make: *** [linux] Error 1
>
>
> any ideas?
>
>
>
>
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
> To unsubscribe see:
> http://mailman.uclinux.org/mailman/options/uclinux-dev
>
> !DSPAM:4742fd01204131336712104!
>
>