[uClinux-dev] A "Segmentation fault" as below when "make menuconfig" after patched with uClinux-dist-20070130-20071101.patch.gz

[Mike Wu]

Thanks Greg! It works now.

On Nov 8, 2007 8:23 AM, Greg Ungerer <gerg at snapgear.com> wrote:
> Hi Mike,
>
>
> Mike Wu wrote:
> > I got a "Segmentation fault" as below when "make menuconfig" after
> > patched with uClinux-dist-20070130-20071101.patch.gz or
> > uClinux-dist-20070130-20071017.patch.gz.
> > I didn't try other older patches. At least, these two patches have
> > problems. Does anyone face the same problem as I do? The OS I use is
> > Sles10.1 .
> >
> > # make CROSS_COMPILE=arm-uclinuxeabi-s menuconfig
> > config/mkconfig > Kconfig
> > CC=cc make -C /home/xxxx/Linux/uClinux-dist/config/kconfig mconf
> > make[1]: Entering directory `/home/xxxx/Linux/uClinux-dist/config/kconfig'
> > cc -DCURSES_LOC="<ncurses.h>"   -c -o mconf.o mconf.c
> > cc -DCURSES_LOC="<ncurses.h>"   -c -o lxdialog/checklist.o
> > lxdialog/checklist.c
> > cc -DCURSES_LOC="<ncurses.h>"   -c -o lxdialog/inputbox.o
> > lxdialog/inputbox.c
> > cc -DCURSES_LOC="<ncurses.h>"   -c -o lxdialog/menubox.o lxdialog/menubox.c
> > cc -DCURSES_LOC="<ncurses.h>"   -c -o lxdialog/textbox.o lxdialog/textbox.c
> > cc -DCURSES_LOC="<ncurses.h >"   -c -o lxdialog/util.o lxdialog/util.c
> > cc -DCURSES_LOC="<ncurses.h>"   -c -o lxdialog/yesno.o lxdialog/yesno.c
> > cc   mconf.o zconf.tab.o lxdialog/checklist.o lxdialog/inputbox.o
> > lxdialog/menubox.o lxdialog/textbox.o lxdialog/util.o lxdialog/yesno.o
> >  -lncursesw -o mconf
> > /usr/lib/gcc/i586-suse-linux/4.1.2/../../../../i586-suse-linux/bin/ld:
> > warning: i386:x86-64 architecture of input file `zconf.tab.o' is
> > incompatible with i386 output
> > make[1]: Leaving directory `/home/xxxx/Linux/uClinux-dist/config/kconfig'
> > /home/xxxx/Linux/uClinux-dist/config/kconfig/mconf Kconfig
> > make: *** [menuconfig] Segmentation fault
>
> I would say there is some object files left hanging around in
> the patch that should have been removed. My build machine is
> an x86-64, so I would say my patch generation script hasn't
> cleaned out config/kconfig/zconf.tab.o
>
> Clean out the objects in there after patching, so do:
>
>      rm config/kconfig/*.o
>      rm config/kconfig/conf
>
> I expect you should be able to build after that.
>
> Regards
> Greg
>
>
>
>
>
> > # gcc -v
> > Using built-in specs.
> > Target: i586-suse-linux
> > Configured with: ../configure --enable-threads=posix --prefix=/usr
> > --with-local-prefix=/usr/local --infodir=/usr/share/info
> > --mandir=/usr/share/man --libdir=/usr/lib --libexecdir=/usr/lib
> > --enable-languages=c,c++,objc,fortran,obj-c++,java,ada
> > --enable-checking=release
> > --with-gxx-include-dir=/usr/include/c++/4.1.2 --enable-ssp
> > --disable-libssp --disable-libgcj --with-slibdir=/lib
> > --with-system-zlib --enable-shared --enable-__cxa_atexit
> > --enable-libstdcxx-allocator=new --program-suffix=
> > --enable-version-specific-runtime-libs --without-system-libunwind
> > --with-cpu=generic --host=i586-suse-linux
> > Thread model: posix
> > gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)
> >
> > # arm-uclinuxeabi-gcc -v
> > Using built-in specs.
> > Target: arm-uclinuxeabi
> > Configured with: /scratch/paul/lite/uclinux/src/gcc-4.2/configure
> > --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu
> > --target=arm-uclinuxeabi --enable-threads --disable-libmudflap
> > --disable-libssp --disable-libgomp --disable-libstdcxx-pch
> > --with-gnu-as --with-gnu-ld --enable-languages=c,c++ --disable-shared
> > --with-pkgversion=CodeSourcery Sourcery G++ Lite 2007q3-51
> > --with-bugurl= https://support.codesourcery.com/GNUToolchain/
> > --disable-nls
> > <https://support.codesourcery.com/GNUToolchain/--disable-nls>
> > --prefix=/opt/codesourcery
> > --with-sysroot=/opt/codesourcery/arm-uclinuxeabi/libc
> > --with-build-sysroot=/scratch/paul/lite/uclinux/install/arm-uclinuxeabi/libc
> >
> > --enable-poison-system-directories
> > --with-build-time-tools=/scratch/paul/lite/uclinux/install/arm-uclinuxeabi/bin
> > --with-build-time-tools=/scratch/paul/lite/uclinux/install/arm-uclinuxeabi/bin
> > Thread model: single
> > gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > uClinux-dev mailing list
> > uClinux-dev at uclinux.org
> > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> > This message was resent by uclinux-dev at uclinux.org
> > To unsubscribe see:
> > http://mailman.uclinux.org/mailman/options/uclinux-dev
>
> --
> ------------------------------------------------------------------------
> Greg Ungerer  --  Chief Software Dude       EMAIL:     gerg at snapgear.com
> Secure Computing Corporation                PHONE:       +61 7 3435 2888
> 825 Stanley St,                             FAX:         +61 7 3891 3630
> Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
> To unsubscribe see:
> http://mailman.uclinux.org/mailman/options/uclinux-dev
>