[uClinux-dev] change ram size on m5329evb - Kernel Panic

[Bill Cook]

Claudia,

  Often the bootloader sets up the memory configuration registers, because
the RAM
has to be working before the kernel can use it. So you should check the
setup in dBug or whatever bootloader you use to load the kernel.

Good luck,
Bill


> -----Original Message-----
> From: Claudia De Bartolomeis [mailto:claudia.debartolomeis at eostech.it]
> Sent: Wednesday, November 07, 2007 5:14 AM
> To: Gianluca Renzi; uclinux-dev at uclinux.org
> Subject: Re: [uClinux-dev] change ram size on m5329evb - Kernel Panic
>
>
> Thanks Gianluca,
> but again it doesn't work .
> Same log except from the "kernel command line: ..." of course.
>
> Claudia
>
> ----- Original Message -----
> From: "Gianluca Renzi" <renzigianluca at eptar.com>
> To: <uclinux-dev at uclinux.org>
> Cc: "Claudia De Bartolomeis" <claudia.debartolomeis at eostech.it>
> Sent: Wednesday, November 07, 2007 10:13 AM
> Subject: Re: [uClinux-dev] change ram size on m5329evb - Kernel Panic
>
>
> > On Wednesday 07 November 2007 09:24, Claudia De Bartolomeis wrote:
> >> Thanks Matt,
> >> I changhed it, but I have the same log with  kernel-panic!
> >> So I suppose there is something more to change,
> >> but I have no idea what it is.
> > just a try: add to kernel command line "mem=64M" (without
> quotes ;-) ) and
> > let
> > see if it works...
> >
> > Good luck!
> > Gianluca
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.503 / Virus Database: 269.15.23/1114 - Release Date:
> > 06/11/2007 20.05
> >
> >
>
>
>