[uClinux-dev] bad magic 5a5a5a5a kernel BUG

[ArronKan]

Dear Greg,

In the test menu like as follow,

----------------------------------------
-      IxDspCodelet Demo Menu          -
----------------------------------------
   0 - Print Menu
   1 - Channel Setup
   2 - Channel Teardown
   3 - Show Channel Parameters
   4 - Show Resource Parameters
   5 - Set a Parameter
   6 - Caller ID Demo
   7 - Gateway and Fax Bypass Demo
   8 - 3-Way Call Demo
   9 - Player Demo
  10 - Diagnostic
  11 - System Test CLI
  12 - Exit

Would you try to test the item 7(Gateway and Fax Bypass Demo)? In my Montejade demoboard with DSR 2.6.2, I found only two ports(port1 & port2) which would get dail tone, but Montejade have four POTS ports. The other issus is about while I dial from port1 to port2, the connection could be established. But I can hear voice in port1 from port2, and vice versa. 

Greg, would you be able to verify this on your board?

I am running the following software version:
 snapgear-3.3.0.tar.gz
 snapgear-20051115.patch
 ixp400AccessLibraryWithCrypto-1_4.zip 
 DSR2.6.2Release.zip
 modules-csr1.4-with-crypto-dsr-20051115.patch
 linux-2.4.31-uc0
 glibc
 Montejade board

Thanks a lot!

Best Regards,

Arron Kan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.uclinux.org/pipermail/uclinux-dev/attachments/20070317/fdbb25dc/attachment.html