September 2006 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Sep 1 05:50:45 EDT 2006
Ending: Sat Sep 30 23:42:44 EDT 2006
Messages: 408

• [uClinux-dev] errors using mmap on uclinux...   David Howells
• [uClinux-dev] [PATCH] NOMMU: Make futexes work under NOMMU conditions   David Howells
• [uClinux-dev] [PATCH 1/2] Check if start address is in vma region in NOMMU function get_user_pages().   David Howells
• [uClinux-dev] [PATCH 2/2] NOMMU: Check VMA protections   David Howells
• [uClinux-dev] :MTD/JFFS2 :problem in retrieving backup of mtdpartition   manoj sony
• [uClinux-dev] How to generate image.rom and image.ram from image.bin   gwunangle
• [uClinux-dev] Can I change 'RedBoot Config' using MTD driver. ?   Amitesh Singh
• [uClinux-dev] [patch/rfc] initial support for /proc/*/maps on nommu   Mike Frysinger
• [uClinux-dev] Code section memory be zero at s3c44b0x when execute start_kernel -> setup_arch   Du Thomas
• [uClinux-dev] FW: uclinux stuck when trying to execute /bin/init   Assaf Harel
• [uClinux-dev] [patch/rfc] initial support for /proc/*/maps on nommu   Mike Frysinger
• [uClinux-dev] Porting uClinux over arm7   Kunal Kishore
• [uClinux-dev] uClinux 2.6.x and Micro/sys SBC1625 board   Jean-François Rousval
• [uClinux-dev] [patch/rfc] initial support for /proc/*/maps on nommu   David Howells
• [uClinux-dev] Can I change 'RedBoot Config' using MTD driver. ?   Per Hallsmark
• [uClinux-dev] sub   Bhaskar r
• [uClinux-dev] Kernel panic occurs with ucdsnmp   Chinmaya Mishra
• [uClinux-dev] Re: Can I change 'RedBoot Config' using MTD driver. ?   Amitesh Singh
• [uClinux-dev] [PATCH/RFC] ld-elf2flt symbol processing for shared libraries   Bernd Schmidt
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] [PATCH/RFC] ld-elf2flt symbol processing for shared libraries   David McCullough
• [uClinux-dev] FW: uclinux stuck when trying to execute /bin/init   Greg Ungerer
• [uClinux-dev] FW: uclinux stuck when trying to execute /bin/init   Assaf Harel
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] Problem booting uclinux on lpc22xx when enabling ethernet support   amit jain
• [uClinux-dev] Tools on Philips LPC2294 and ucLinux 2.6   Albani Alessio
• [uClinux-dev] Getting segmentation fault while unmounting JFFS2 file system .   Amitesh Singh
• [uClinux-dev] Re: Getting segmentation fault while unmounting JFFS2 file system .   Amitesh Singh
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] PPPD: Dynamic Address Allocation for GPRS   Paul Romero
• [uClinux-dev] PPPD: Dynamic Address Allocation for GPRS   Erwin Authried
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] telnetd (the one under snapgear/user/telnetd/) does not prompt for login   Weiguang Shi
• [uClinux-dev] telnetd (the one under snapgear/user/telnetd/) does not prompt for login   Weiguang Shi
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   MANJU V
• [uClinux-dev] [PATCH] FRV: Use the generic time stuff for FRV   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   Doug Kehn
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   MANJU V
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mounting fat32 partitions on large hard drive   Edward Wang
• [uClinux-dev] UART Driver---Unable to Disable Rx Line   Sijoy Cherian
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   Doug Kehn
• [uClinux-dev] PPPD: Dynamic Address Allocation for GPRS   Paul Romero
• [uClinux-dev] Porting question...   John Z. Bohach
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   Gavin Lambert
• [uClinux-dev] Porting question...   David McCullough
• [uClinux-dev] Fwd: flash_to_file() and file_to_flash() in mtd_debug.c   Weiguang Shi
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   MANJU V
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] Connect remotely to my uclinux board   Daniel Alomar
• [uClinux-dev] Connect remotely to my uclinux board   juan manuel ramil yañez
• [uClinux-dev] extract romfs from image.bin   Aitor Calderón
• [uClinux-dev] Connect remotely to my uclinux board   Chris Gray
• Fwd: Re: [uClinux-dev] Connect remotely to my uclinux board   Chris Gray
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   Per Hallsmark
• [uClinux-dev] uclinux-dist-20060803 torrent   Jeremy Collake
• [uClinux-dev] extract romfs from image.bin   David McCullough
• [uClinux-dev] IXP400 Access Library Patch for uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] boa and cgi weird behaviour   Aitor Calderón
• [uClinux-dev] [PATCH] FRV: Use the generic IRQ stuff   David Howells
• [uClinux-dev] Porting question...   John Z. Bohach
• [uClinux-dev] Porting question...   David Howells
• [uClinux-dev] [PATCH] NOMMU: Document NOMMU support for futexes   David Howells
• [uClinux-dev] int system (char * cmd) problem (coldfire MCF5282)   Sagaert Johan
• [uClinux-dev] PPPD: Dynamic Address Allocation for GPRS   Erwin Authried
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   Gavin Lambert
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] IXP400 Access Library Patch for uClinux-dist-20060803   Greg Ungerer
• [uClinux-dev] Porting uClinux over ARM7 processor   Kunal Kishore
• [uClinux-dev] Re: [PATCH] FRV: Use the generic IRQ stuff   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] www.uclinux.org   Tom
• [uClinux-dev] www.uclinux.org   Francesco Lodi
• [uClinux-dev] www.uclinux.org   Jeremy Collake
• [uClinux-dev] Re: [PATCH] FRV: Use the generic IRQ stuff   David Howells
• [uClinux-dev] [PATCH 1/3] FRV: Improve FRV's use of generic IRQ handling   David Howells
• [uClinux-dev] [PATCH 2/3] FRV: Permit __do_IRQ() to be dispensed with   David Howells
• [uClinux-dev] [PATCH 3/3] FRV: Mark __do_IRQ() deprecated   David Howells
• [uClinux-dev] www.uclinux.org   Michael Durrant
• [uClinux-dev] Kernel panic: Aiee, killing interrupt handler   Katey Yu
• [uClinux-dev] www.uclinux.org   Tom
• [uClinux-dev] testing .. please ignore   Michael Durrant
• [uClinux-dev] [patch] add ptmx support to telnetd   Mike Frysinger
• [uClinux-dev] toolchain to use   Weiguang Shi
• [uClinux-dev] toolchain to use   Weiguang Shi
• [uClinux-dev] [patch] add ptmx support to telnetd   David McCullough
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] Kernel panic: Aiee, killing interrupt handler   Greg Ungerer
• [uClinux-dev] toolchain to use   Greg Ungerer
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Greg Ungerer
• [uClinux-dev] toolchain to use   Weiguang Shi
• [uClinux-dev] Porting question...   Greg Ungerer
• [uClinux-dev] Problem booting uclinux on lpc22xx when enabling ethernet support   Greg Ungerer
• [uClinux-dev] skb_mem: not enough memory, problem on ARM board   Greg Ungerer
• [uClinux-dev] JFFS2 : mkfs.jffs2 unable to make image for big files(config file)   manoj sony
• [uClinux-dev] JFFS2 : mkfs.jffs2 unable to make image for big files(config file)   Rizvan
• [uClinux-dev] Re: [PATCH 2/3] FRV: Permit __do_IRQ() to be dispensed with   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] JFFS2 : mkfs.jffs2 unable to make image for big files(config file)   manoj sony
• [uClinux-dev] yaffs partition   xavier.montagne
• [uClinux-dev] yaffs partition   Rizvan
• [uClinux-dev] yaffs partition   xavier.montagne
• [uClinux-dev] Kernel panic: Aiee, killing interrupt handler   Katey Yu
• [uClinux-dev] yaffs partition   Rizvan
• [uClinux-dev] www.uclinux.org   Tom
• [uClinux-dev] yaffs partition   xavier.montagne
• [uClinux-dev] www.uclinux.org   Michael Durrant
• [uClinux-dev] [PATCH] quagga romfs target fails - uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] how to enable wi-fi on IXP425 ??   Parth Pathak
• [uClinux-dev] how to enable wi-fi on IXP425 ??   Weiguang Shi
• [uClinux-dev] :How to Enable/Disable Ping Server in uClinux   Gavin Lambert
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] [PATCH] quagga romfs target fails - uClinux-dist-20060803   David McCullough
• [uClinux-dev] how to enable wi-fi on IXP425 ??   Greg Ungerer
• [uClinux-dev] system crash when memory usage exceeds 8MB   shandy
• [uClinux-dev] strace on m68k Coldfire 4.4-1   Greg Ungerer
• [uClinux-dev] how to enable wi-fi on IXP425 ??   Assaf Harel
• [uClinux-dev] strace on m68k Coldfire 4.4-1   Philippe De Muyter
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] IDE DMA mode for IXP425   Dhanashri K
• [uClinux-dev] Issues regarding the 'ucfront' compiler wrapper   glhs329 at gmail.com
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] mtd/Jffs : unable to read from flash after making change in jffs enbled config partition (flash lock )   manoj sony
• [uClinux-dev] Porting elf2flt to a new ARCH   John Z. Bohach
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   Nathan Sidwell
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   Mike Frysinger
• [uClinux-dev] old "release" code in toplevel Makefile   Mike Frysinger
• [uClinux-dev] kexec for ARM??   Adam Meadows
• [uClinux-dev] ixp400.o: ERROR, no Microcode found in memory   Rowan Potgieter
• [uClinux-dev] Porting elf2flt to a new ARCH   David McCullough
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   David McCullough
• [uClinux-dev] old "release" code in toplevel Makefile   David McCullough
• [uClinux-dev] [PATCH/RFC] ld-elf2flt symbol processing for shared libraries   David McCullough
• [uClinux-dev] Issues regarding the 'ucfront' compiler wrapper   David McCullough
• [uClinux-dev] old "release" code in toplevel Makefile   Mike Frysinger
• [uClinux-dev] [patch] make sure default choice value is actually set by default   David McCullough
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   Nathan Sidwell
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   David McCullough
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   Nathan Sidwell
• [uClinux-dev] How to share the ssl library?   GUIRY Aroun
• [uClinux-dev] IDE DMA mode for IXP425   Dhanashri K
• [uClinux-dev] uclinux + Graphic display   amit jain
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   David McCullough
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] [ANNOUNCE] uClinux-dist-20060803 release   Greg Ungerer
• [uClinux-dev] Issues regarding the 'ucfront' compiler wrapper   glhs329 at gmail.com
• [uClinux-dev] strace on m68k Coldfire 4.4-1   Stuart Hughes
• [uClinux-dev] Porting elf2flt to a new ARCH   John Z. Bohach
• [uClinux-dev] how to enable wi-fi on IXP425 ??   Parth Pathak
• [uClinux-dev] [Fwd: convert ld-elf2flt to C program]   Paul G. Allen
• [uClinux-dev] how to enable wi-fi on IXP425 ??   Zoltan HERPAI
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] Issues regarding the 'ucfront' compiler wrapper   David McCullough
• [uClinux-dev] uClinux include directory for user space apps   Beng Tan
• [uClinux-dev] uClinux include directory for user space apps   David McCullough
• [uClinux-dev] Porting elf2flt to a new ARCH   David McCullough
• [uClinux-dev] uClinux include directory for user space apps   Beng Tan
• [uClinux-dev] uClinux include directory for user space apps   David McCullough
• [uClinux-dev] uClinux include directory for user space apps   Beng Tan
• [uClinux-dev] uClinux include directory for user space apps   Beng Tan
• [uClinux-dev] uClinux include directory for user space apps   David McCullough
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Philippe De Muyter
• [uClinux-dev] bad magic 5a5a5a5a kernel BUG   Lemarchand stéphane
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] strace on m68k Coldfire 4.4-1   Philippe De Muyter
• [uClinux-dev] bdmflasher usage   Aitor Calderón
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] uClinux, problem with the hello.c file running on mcf5282EVB   Mathieu Bataille
• [uClinux-dev] PPPD: Dynamic Address Allocation for GPRS   Paul Romero
• [uClinux-dev] [ANNOUNCE] uClinux-dist-20060803 release   Leon Woestenberg
• [uClinux-dev] error: Unable to mmap process text, errno 12   David Wu
• [uClinux-dev] duplicated clone and thttpd problem, related ?   David Wu
• [uClinux-dev] Snapgear 3.3.1 - rtc-lib.c error   Rowan Potgieter
• [uClinux-dev] 2.6, IXP425 and access libraries   Parth Pathak
• [uClinux-dev] How to setup the uClinux compiling environment for Sigma Designs   Huang SQ
• [uClinux-dev] Porting elf2flt to a new ARCH   John Williams
• [uClinux-dev] 2.6, IXP425 and access libraries   Doug Kehn
• [uClinux-dev] [PATCH] "Bad frame format" when running out of memory   Gavin Lambert
• [uClinux-dev] python 2.4.x on uclinux   Beng Tan
• [uClinux-dev] Error in during compilation of ucdsnmp   Chinmaya Mishra
• [uClinux-dev] uClinux, problem with the hello.c file running on mcf5282EVB   Heiko Degenhardt
• [uClinux-dev] Coldfire, Ledman, CGI and Webserver on MCF5208EVB   Sulaiman Scharffenorth
• [uClinux-dev] dead mcf5275 board   Aitor Calderón
• [uClinux-dev] dead mcf5275 board   Aitor Calderón
• [uClinux-dev] Coldfire, Ledman, CGI and Webserver on MCF5208EVB   Chris Gray
• [uClinux-dev] uClinux, problem with the hello.c file running on mcf5282EVB   Mathieu Bataille
• [uClinux-dev] Porting elf2flt to a new ARCH   John Z. Bohach
• [uClinux-dev] How to change the STDOUT from COM port to LCD.   amit jain
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] [PATCH] "Bad frame format" when running out of memory   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] 2.6, IXP425 and access libraries   Parth Pathak
• [uClinux-dev] 2.6, IXP425 and access libraries   Doug Kehn
• [uClinux-dev] 2.6, IXP425 and access libraries   Parth Pathak
• [uClinux-dev] [PATCH] user/shadow/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] [PATCH] arc-ixp4xx/platform.h -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] [ANNOUNCE] uClinux-dist-20060803 release   Weiguang Shi
• [uClinux-dev] Boot sequence of ARM Linux???   Tao Wang
• [uClinux-dev] [ANNOUNCE] uClinux-dist-20060803 release   Greg Ungerer
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Greg Ungerer
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] 2.6, IXP425 and access libraries   Greg Ungerer
• [uClinux-dev] ucdsnmp error   Chinmaya Mishra
• [uClinux-dev] [PATCH] user/shadow/makefile -- uClinux-dist-20060803   Greg Ungerer
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] [ANNOUNCE] uClinux-dist-20060803 release   Glenn Henshaw
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] error compiling oprofile kernel 2.6.11   Puneet Goel
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] uClinux-dist-20060803 Makefile Question   Mark Schank
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] uClinux-dist-20060803 Makefile Question   David McCullough
• [uClinux-dev] [ANNOUNCE] uClinux-dist-20060803 release   Greg Ungerer
• [uClinux-dev] [PATCH] arc-ixp4xx/platform.h -- uClinux-dist-20060803   Greg Ungerer
• [uClinux-dev] error: Rn must not overlap other operands   Alvin Cao
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] test (please ignore)   Puneet Goel
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Greg Ungerer
• [uClinux-dev] Snapgear 3.3.1 - rtc-lib.c error   Greg Ungerer
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Philippe De Muyter
• [uClinux-dev] (no subject)   quyipeng
• [uClinux-dev] MTD partitie Image   Ferry de Groot
• [uClinux-dev] how many people use the uClinux for microblaze?   xs w
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] IDE DMA mode for IXP425   Dhanashri K
• [uClinux-dev] uClinux Training - San Jose Oct 24th-27th, 2006   Phil Wilshire
• [uClinux-dev] File POST Upload Speed Very Slow   Armenta, Robert (STRT)
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   David McCullough
• [uClinux-dev] uClinux-dist-20060803 Makefile Question   Mark Schank
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Philippe De Muyter
• [uClinux-dev] uClinux, problem with compiling the hello.c file running on mcf5282EVB   Mathieu Bataille
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] problem in having access all led in mcf5282   Túlio Severiano
• [uClinux-dev] Stream/raped DoS vulnerability in 2.4 kernel   Volante, Michael (STRT)
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   David McCullough
• [uClinux-dev] Stream/raped DoS vulnerability in 2.4 kernel   David McCullough
• [uClinux-dev] how many people use the uClinux for microblaze?   John Williams
• [uClinux-dev] how many people use the uClinux for microblaze?   David McCullough
• 回复： Re: [uClinux-dev] how many people use the uClinux for microblaze?   xs w
• [uClinux-dev] how many people use the uClinux for microblaze?   John Williams
• [uClinux-dev] how many people use the uClinux for microblaze?   David McCullough
• [uClinux-dev] Stream/raped DoS vulnerability in 2.4 kernel   Friedrich, Lars
• [uClinux-dev] How applications are loaded in uclinux   PH
• [uClinux-dev] ucdsnmp error   Chinmaya Mishra
• [uClinux-dev] How applications are loaded in uclinux   Winter, Stephan
• [uClinux-dev] smbd only serves one client   Edward Wang
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] How applications are loaded in uclinux   PH
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Philippe De Muyter
• [uClinux-dev] Telnet and FTP server   amit jain
• [uClinux-dev] Stream/raped DoS vulnerability in 2.4 kernel   David McCullough
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] IXP4xx Hardware Access Library v2.3   Thierry Panthier
• [uClinux-dev] IXP4xx Hardware Access Library v2.3   Thierry Panthier
• [uClinux-dev] Read QDAC in Avnet MCF5282?   Túlio Severiano
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   Bernd Schmidt
• [uClinux-dev] How applications are loaded in uclinux   Mike Frysinger
• [uClinux-dev] how many people use the uClinux for microblaze?   Jamie Lokier
• [uClinux-dev] IXP425 dcache flush   Weiguang Shi
• [uClinux-dev] building with specific vendor config   Satyajit Ketkar
• [uClinux-dev] [patch] add ptmx support to telnetd   Mike Frysinger
• [uClinux-dev] how many people use the uClinux for microblaze?   David McCullough
• [uClinux-dev] building with specific vendor config   David McCullough
• [uClinux-dev] ipx on linux   quyipeng
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] how best to handle configure based packages ?   Mike Frysinger
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] mmaps on !MMU   David Howells
• [uClinux-dev] how best to handle configure based packages ?   David McCullough
• [uClinux-dev] Re: [PATCH 2/3] FRV: Permit __do_IRQ() to be dispensed with   David Howells
• [uClinux-dev] building with specific vendor config   Satyajit Ketkar
• [uClinux-dev] building with specific vendor config   Satyajit Ketkar
• [uClinux-dev] time_init compile error with 2.6.17(gcc 3.4.0) -- Bug Report   Du Thomas
• [uClinux-dev] how best to handle configure based packages ?   Mike Frysinger
• [uClinux-dev] how best to handle configure based packages ?   Doug Kehn
• [uClinux-dev] 2.6 and wi-fi driver   Parth Pathak
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] building with specific vendor config   David McCullough
• [uClinux-dev] how best to handle configure based packages ?   David McCullough
• [uClinux-dev] 2.6 and wi-fi driver   David McCullough
• [uClinux-dev] Telnet and FTP server   David McCullough
• [uClinux-dev] mmaps on !MMU   Gavin Lambert
• [uClinux-dev] ixp425_eth.c and ixp400_eth.c   Weiguang Shi
• [uClinux-dev] Ethernet Problem   Amitesh Singh
• [uClinux-dev] running and compiling "Hello world file"(C)on mcf5282 eval board (coldfire)   Mathieu Bataille
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Philippe De Muyter
• [uClinux-dev] Re: Ethernet Problem   Amitesh Singh
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] ixp425_eth.c and ixp400_eth.c   Doug Kehn
• [uClinux-dev] Re: Ethernet Problem   Doug Kehn
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Philippe De Muyter
• [uClinux-dev] gdbserver broken on later m5208 by a recent patch   Stuart Hughes
• [uClinux-dev] building with specific vendor config   Satyajit Ketkar
• [uClinux-dev] how best to handle configure based packages ?   Mike Frysinger
• [uClinux-dev] how best to handle configure based packages ?   Mike Frysinger
• [uClinux-dev] Telnet and FTP server   David Wu
• [uClinux-dev] [PATCH] user/iperf/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] Telnet and FTP server   Amitesh Singh
• [uClinux-dev] Telnet and FTP server   Amitesh Singh
• [uClinux-dev] Re: Ethernet Problem   Amitesh Singh
• [uClinux-dev] Re: Ethernet Problem   Amitesh Singh
• [uClinux-dev] Re: Ethernet Problem   Amitesh Singh
• [uClinux-dev] m68k-elf 3.4 Compiler bug?   Mike Lavender
• [uClinux-dev] Telnet and FTP server   David McCullough
• [uClinux-dev] building with specific vendor config   David McCullough
• [uClinux-dev] how best to handle configure based packages ?   David McCullough
• [uClinux-dev] [PATCH] user/iperf/makefile -- uClinux-dist-20060803   David McCullough
• R: [uClinux-dev] m68k-elf 3.4 Compiler bug?   Tarani, Andrea
• [uClinux-dev] Problem with ramdisk mounted on /var (on Montejade IXP425)   Arnon Meydav
• [uClinux-dev] Port uclinux on LPC2294   Albani Alessio
• [uClinux-dev] [PATCH] lib/Makefile prune Target -- uClinux-dist-20060803   Doug Kehn
• R: [uClinux-dev] m68k-elf 3.4 Compiler bug?   Matt Waddel
• [uClinux-dev] Real-Time Clock device   Matt Waddel
• [uClinux-dev] [PATCH] lib/Makefile prune Target -- uClinux-dist-20060803   David McCullough
• [uClinux-dev] Real-Time Clock device   David McCullough
• [uClinux-dev] 2.6 and wi-fi driver   Parth Pathak
• [uClinux-dev] Increase Flash Memory >2MB   Ferry de Groot
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Ferry de Groot
• [uClinux-dev] Bug in snapgear mach_types file   Arnon Meydav
• [uClinux-dev] Bug in snapgear mach_types file   David McCullough
• [uClinux-dev] [uClinux] : Dhcrelay not relaying dhcp packets   manoj sony
• [uClinux-dev] Bug in snapgear mach_types file   Doug Kehn
• [uClinux-dev] Bug in snapgear mach_types file   David McCullough
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] tasklet in uclinux   ankur maheshwari
• [uClinux-dev] [uClinux] : Dhcrelay not relaying dhcp packets   Doug Kehn
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   David McCullough
• [uClinux-dev] tasklet in uclinux   Phil Wilshire
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] uClinux coldfire, nothig happens when running usual "Hello" file.   Mathieu Bataille
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] Allow allocating large blocks (>1 MB) of memory   Gavin Lambert
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   David McCullough
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   David McCullough
• [uClinux-dev] uClinux coldfire, nothig happens when running usual "Hello" file.   David McCullough
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   Doug Kehn
• [uClinux-dev] [PATCH] ssh/makefile -- uClinux-dist-20060803   David McCullough
• [uClinux-dev] unix sockets on ro filesystem   Andrew Kohlsmith
• [uClinux-dev] unix sockets on ro filesystem   David McCullough
• [uClinux-dev] unix sockets on ro filesystem   Andrew Kohlsmith
• [uClinux-dev] U-Boot for Motorola M5272C3 and M5282EVB   Túlio Severiano
• [uClinux-dev] uClinux coldfire, nothig happens when running usual "Hello" file.   Daniel Alomar
• [uClinux-dev] uClinux coldfire, nothig happens when running usual "Hello" file.   Mathieu Bataille
• [uClinux-dev] why Mac address change?   Oscar Fraile
• [uClinux-dev] uClinux coldfire, nothig happens when running usual "Hello" file.   David McCullough
• RE: [uClinux-dev] why Mac address change?   Jate Sujjavanich
• [uClinux-dev] Generic USB Host Driver   amol sukerkar
• [uClinux-dev] Generic USB Host Driver   John Williams
• [uClinux-dev] Generic USB Host Driver   amol sukerkar
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Sulaiman Scharffenorth
• [uClinux-dev] uclinux with the kernel-2.6.5 patch for embededlinux, but I failed in compiling it finally   Shi Chao
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Andrew Kohlsmith
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Túlio Severiano
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Andrew Kohlsmith
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Túlio Severiano
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Andrew Kohlsmith
• [uClinux-dev] TCP performance   Bill Cook
• [uClinux-dev] update osip2 to 2.2.2   Mike Frysinger
• [uClinux-dev] why Mac address change?   xavier.montagne
• [uClinux-dev] Questions of Shared Library for ARM   Jason Chang
• [uClinux-dev] Add new platform - Do I need to change the kernel configs   Joel Lindsay
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Túlio Severiano
• [uClinux-dev] why Mac address change?   David McCullough
• [uClinux-dev] Questions of Shared Library for ARM   David McCullough
• [uClinux-dev] Add new platform - Do I need to change the kernel configs   David McCullough
• [uClinux-dev] Add new platform - Do I need to change the kernelconfigs   Joel Lindsay
• [uClinux-dev] Add new platform - Do I need to change the kernelconfigs   David McCullough
• [uClinux-dev] User space external interrupt   Stephane
• [uClinux-dev] Add new platform - Do I need to change thekernelconfigs   Joel Lindsay
• [uClinux-dev] Add new platform - Do I need to change thekernelconfigs   David McCullough
• [uClinux-dev] testing ps/2 keyboard mouse   ankur maheshwari
• [uClinux-dev] User space external interrupt   Erwin Authried
• [uclinux-dev] : Netflash utility not working   manoj sony
• [uclinux-dev] : Netflash utility not working   Oscar Fraile
• [uClinux-dev] Controlling LEDs/GPIO on uclinux coldfire   Andrew Kohlsmith
• [uClinux-dev] User space external interrupt   Stephane
• [uClinux-dev] TCP performance   Kevin Fry
• [uClinux-dev] Profiling on ARM Platform   Edison David
• [uClinux-dev] User space external interrupt   Erwin Authried
• [uClinux-dev] Lucy Wang/PEK/SC/PHILIPS is out of the office.   Lucy Wang
• [uClinux-dev] [patch] fix problems with vplay/mixer   Mike Frysinger
• [uClinux-dev] snapgear-modules-20051115.sh   Weiguang Shi

Last message date: Sat Sep 30 23:42:44 EDT 2006
Archived on: Tue Mar 20 10:50:11 EDT 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...