[uClinux-dev] enable pthread_create on in MCF5275

Javier Cardona javier at cozybit.com
Wed Oct 26 16:01:04 EDT 2005


Correction...

On Wednesday 26 October 2005 10:53 am, Javier Cardona wrote:
> I have only been able to run one of the three demos on the MCF5275, but,
> strangely enough, it's the most complete demo of the three:
>
> /bin> ./thdm
> pid 19: failed 11
> /bin> ./mtdm
> pid 23: failed 11
> /bin> ./bcdm
> master thread runs: 305
> slave thread 0 runs: 307
> slave thread 1 runs: 307
> slave thread 2 runs: 307
> slave thread 3 runs: 307
> done ... terminate with kill command or CRTL+C

I was able to execute each demo at least once, but not reliably:

/bin> ./thdm                 
pid 19: failed 4
/bin> ./mtdm
total runs: 15096
/bin> ./mtdm
total runs: 15111
/bin> ./mtdm
total runs: 15084
/bin> ./thdm
pid 43: failed 4
/bin> ./thdm
pid 49: failed 4
/bin> ./bcdm
master thread runs: 256
slave thread 0 runs: 258
slave thread 1 runs: 258
slave thread 2 runs: 258
slave thread 3 runs: 258
done ... terminate with kill command or CRTL+C
pid 55: failed 2
/bin> ./mtdm
pid 62: failed 11
/bin> ./mtdm
pid 68: failed 11
/bin> ./thdm
pid 73: failed 11
/bin> ./bcdm
pid 77: failed 11

Any suggestions?

Thanks,


-- 
Javier Cardona
cozybit Inc.





More information about the uClinux-dev mailing list