[uClinux-dev] M5272 uClinux 2.6 booting error.but 2.4 works very good.

linuxcrazy at 126.com linuxcrazy at 126.com
Sun Oct 16 21:09:32 EDT 2005


 
This is my dev board outputs. Who Can tell me, What can I should do?
my board: 
    coldfire 5272
    16M SDRAM
    8M FLASH AT49BV322A
===============================
Hard Reset
SDRAM Size: 16M
Press 'D' if you want dBUG ....

Copyright 1995-2001 Motorola, Inc.  All Rights Reserved.
ColdFire MCF5272 EVS Firmware v2e.1a.1c (Build 9 on Sep 14 2001 14:38:07)

Enter 'help' for help.

dBUG>
dBUG> dn -i image.bin
Address:  0x00020000
Eth Mac Addr is 00:CF:52:72:C3:01
Downloading Image 'image.bin' from 172.16.4.58
TFTP download successful
Read 1942532 bytes (3795 blocks)
dBUG> go 0x20000
Linux version 2.6.12-uc0 (root at kehuilinux) (gcc version 2.95.3 20010315 (release
)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and
shared lib patches from http://www.snapgear.com/)) #4 Fri Oct 14 11:43:34 CST 20
05


uClinux/COLDFIRE(m5272)
COLDFIRE port done by Greg Ungerer, gerg at snapgear.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
Built 1 zonelists
Kernel command line:
PID hash table entries: 128 (order: 7, 2048 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory available: 14128k/16384k RAM, 0k/0k ROM (850k kernel code, 146k data)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
ColdFire internal UART serial driver version 1.00
ttyS0 at 0x10000100 (irq = 73) is a builtin ColdFire UART
ttyS0 at 0x10000100 (irq = 73) is a builtin ColdFire UART
io scheduler noop registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
FEC ENET Version 0.2
bad frame format: 00000000
PC: [<0010d626>]
SR: 2010  SP: 00244f60  a2: ffe04004
d0: 0000ffc0    d1: 0f800000    d2: 000005f0    d3: 01000000
d4: 00000000    d5: 00000000    a0: 000fd690    a1: 00236006
Process swapper (pid: 1, stackpage=00244be0)
Stack from 00244f60:<0>
       <0> 0f800000<0> 000005f0<0> 01000000<0> 00000000<0> 00000000<0> 000fd690<
0> 00236006<0> ffe04004<0>
       <0> 0000ffc0<0> ffffffff<0> 00000000<0> 4c082010<0> 0010d626<0> 00000000<
0> 00000b00<0> 00236000<0>
       <0> 00000000<0> 00000000<0> 00000000<0> 00102ff8<0> 0000016c<0> 000ef71e<
0> 000ab008<0> 0010d94a<0>
       <0> 00236000<0> 00000000<0> 00000b00<0> 00000000<0> 0010fcac<0> 00000000<
0> 00104550<0> 00102fd0<0>
       <0> 00000b00<0> 001045da<0> 00020138<0> 00000b00<0> 00000001<0> 00000000<
0> 00020a12<0> 00000000<0>
Call Trace:<0>
Kernel panic - not syncing: Attempted to kill init
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.uclinux.org/pipermail/uclinux-dev/attachments/20051017/5f1b9869/attachment.html>


More information about the uClinux-dev mailing list