[uClinux-dev] S3C4410 and linux 2.6

Hector Oron hector.oron at gmail.com
Fri Oct 14 10:48:28 EDT 2005


I dunno if you can select it from xconfig menu, but you are able to run
uclinux-dist on mmu processors.
 BTW, i am also interested on this kind os devices. Do you have a place on
the net to share info ?
 My place blow up, :-(

 On 10/14/05, xavier.montagne <xavier.montagne at wanadoo.fr> wrote:
>
> Hi Greg,
>
> Thanks once more for your answers ;-)
> I would like to clarify one point : is it possible to enable or disable
> the
> MMU in a uClinux 2.6 release from the xconfig or menuconfig panels ? If so
> then it is possible to run the 2410 (ARM920T) with the MMU capability
> enable
> !
> I though that uClinux was only for mmuless target... but maybe I'm
> wrong...
>
> Does the linux 2.6 contain the uClinux 2.6 code so that you can select the
> MMU or not ?... or are uClinux 2.6 and Linux 2.6 something still realy
> different ?
>
> Xavier
>
> ----- Original Message -----
> From: "Greg Ungerer" <gerg at snapgear.com>
> To: "uClinux development list" <uclinux-dev at uclinux.org>
> Sent: Friday, October 14, 2005 5:59 AM
> Subject: Re: [uClinux-dev] S3C4410 and linux 2.6
>
>
> > Hi Xavier,
> >
> > xavier.montagne wrote:
> > > Did anyone try to use the debian linux 2.6 release with the S3C2410
> from
> > > Samsung ?
> >
> > If the debian linux 2.6 release contains a Linus kernel then it
> > won't have the arm mmuless code support (which isn't in mainline
> > kernels yet).
> >
> >
> > > Can you easily enable and disable the MMU feature in the 2.6 uClinux
> or
> is
> > > it a "build-in" release with no MMU settings ??
> >
> > If I understand your question, it is a built-in. As such you have
> > to select if you want to use the MMU at compile time. You cannot
> > runtime select that.
> >
> > Regards
> > Greg
> >
> >
> >
> > ------------------------------------------------------------------------
> > Greg Ungerer -- Chief Software Dude EMAIL: gerg at snapgear.com
> > SnapGear -- a CyberGuard Company PHONE: +61 7 3435 2888
> > 825 Stanley St, FAX: +61 7 3891 3630
> > Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
> > _______________________________________________
> > uClinux-dev mailing list
> > uClinux-dev at uclinux.org
> > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> > This message was resent by uclinux-dev at uclinux.org
> >
>
>
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.uclinux.org/pipermail/uclinux-dev/attachments/20051014/338a2107/attachment.html>


More information about the uClinux-dev mailing list