[uClinux-dev] building error

David McCullough davidm at snapgear.com
Wed Oct 12 17:38:34 EDT 2005


Jivin Isack Waserman lays it down ...
> On Tuesday 11 October 2005 20:48, Itche wrote:
> Hi David,
> I have implemented your suggestion and I'm getting new error

Sounds like you need and updated fec driver.
Which uClinux-dist are you working with ?

Cheers,
Davidm

> 
> CC      drivers/net/fec.o
> drivers/net/fec.c: In function `fec_get_mac':
> drivers/net/fec.c:1211: `fec_flashmac' undeclared (first use in this function)
> drivers/net/fec.c:1211: (Each undeclared identifier is reported only once
> drivers/net/fec.c:1211: for each function it appears in.)
> drivers/net/fec.c:1219: warning: assignment discards qualifiers from pointer 
> target type
> drivers/net/fec.c:1222: warning: assignment discards qualifiers from pointer 
> target type
> drivers/net/fec.c: In function `fec_enet_init':
> drivers/net/fec.c:1206: warning: `iap' might be used uninitialized in this 
> function
> make[3]: *** [drivers/net/fec.o] Error 1
> make[2]: *** [drivers/net] Error 2
> make[1]: *** [drivers] Error 2
> make[1]: Leaving directory `/root/uclinux/uClinux-dist/linux-2.6.x'
> make: *** [linux] Error 1
> 
> Any ideas?
> Thanks again
> Itche
> 
> 
> > Thanks David,
> > I'll try that tomorrow
> > Isack
> >
> > -----Original Message-----
> > From: uclinux-dev-bounces at uclinux.org
> > [mailto:uclinux-dev-bounces at uclinux.org] On Behalf Of David McCullough
> > Sent: Tuesday, October 11, 2005 6:18 PM
> > To: uClinux development list
> > Subject: Re: [uClinux-dev] building error
> >
> >
> > Jivin itche at bridgeport.edu lays it down ...
> >
> > > Hi all,
> > > i have just upgraded from 2.4.19 to 2.6.xx.
> > > I ma trying to build with all defaults targeting motorola 5272 evalboard.
> > > i'm getting the following error after "Make"
> > >
> > > usr/initramfs_data.S: Assembler messages:
> > > usr/initramfs_data.S:29: Error: Unknown pseudo-op:  `.incbin'
> > > make[2]: *** [usr/initramfs_data.o] Error 1
> > > make[1]: *** [usr] Error 2
> > > make[1]: Leaving directory `/root/uclinux/uClinux-dist/linux-2.6.x'
> > > make: *** [linux] Error 1
> >
> > You need to get the newer tools:
> >
> > http://www.uclinux.org/pub/uClinux/uclinux-elf-tools/m68k-elf-tools-2003100
> >3 .sh
> >
> > when building 2.6 kernels,
> >
> > Cheers,
> > Davidm
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org

-- 
David McCullough, davidm at cyberguard.com.au, Custom Embedded Solutions + Security
Ph:+61 734352815 Fx:+61 738913630 http://www.uCdot.org http://www.cyberguard.com



More information about the uClinux-dev mailing list