[uClinux-dev] How to reboot my board 5282

Greg Ungerer gerg at snapgear.com
Thu Oct 6 21:41:37 EDT 2005


Hi Oscar,

Oscar Fraile wrote:
> When i execute the REBOOT command, this is what happend:
> 
> 				Restarting system.
> 				bad frame format: 00000000
> 				PC: [<ffc40006>]
> 				SR: 2704  SP: 006a3e60  a2: 0026da4c
> 				d0: 00000016    d1: 000dc174    d2: 28121969    d3: 0001f914
> 				d4: 00000000    d5: 00662004    a0: 00014832    a1: 0010d698
> 				Process reboot (pid: 36, stackpage=006a3000)
[snip]
> The configuration of my board is :
> 
> coldfire 5282
> 2M extern Flash (start at u-boot at 0xffc00000, uClinux image at 0xffc40000)
> 32M extern SDRAM (start at 0x00000000)
> uClinux 2.4.24-uc0
> 
> Can help my anybody?, it's the right command to reboot the board?

What sort of board is your 5282 on?

The cpu/board specific reboot code is in
linux-2.4.x/include/asm-m68knommu/system.h
so have a look at that.

Regards
Greg


------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     gerg at snapgear.com
SnapGear -- a CyberGuard Company            PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com



More information about the uClinux-dev mailing list