[uClinux-dev] How to reboot my board 5282

Mike Lavender mike at steroidmicros.com
Thu Oct 6 12:08:21 EDT 2005


Hi Oscar,

    I use the shutdown command.  "shutdown - r now" to reboot and
"shutdown -h now" to halt the system.  It works on my 5282 board.

Mike

> -----Original Message-----
> From: uclinux-dev-bounces at uclinux.org
> [mailto:uclinux-dev-bounces at uclinux.org]On Behalf Of Oscar Fraile
> Sent: October 6, 2005 3:31 AM
> To: uclinux-dev at uclinux.org
> Subject: [uClinux-dev] How to reboot my board 5282
>
>
> Hello,
>
> When i execute the REBOOT command, this is what happend:
>
> 				Restarting system.
> 				bad frame format: 00000000
> 				PC: [<ffc40006>]
> 				SR: 2704  SP: 006a3e60  a2: 0026da4c
> 				d0: 00000016    d1: 000dc174    d2:
> 28121969    d3: 0001f914
> 				d4: 00000000    d5: 00662004    a0:
> 00014832    a1: 0010d698
> 				Process reboot (pid: 36, stackpage=006a3000)
> 				Frame format=4 Stack from 006a3e9c:
> 				        006a3fc4 0001f9e2 00000000
> 000ecf0a 001333b4 00000001 00000000 00000058
> 				        0026da4c 0026d980 00000000
> 00662004 006f4000 00000fff 0002a502 0002a43a
> 				        0026d95c 00662004 0002a43a
> 0026d95c 00662004 00000000 00000004 00000004
> 				        00327190 00000000 0010abac
> 002ee000 006a3f18 0001bc3e 00000000 006a3f78
> 				        00013b18 00000004 00000004
> 00327190 00000000 00000000 00000001 006a2000
> 				        002ee000 006a2000 0010abb4
> 00662004 006a3f78 00016196 006a3f8c 0000b11c
> 				Call Trace:
> 				        [<0001f9e2>] [<000ecf0a>]
> [<0002a502>] [<0002a43a>]
> 				        [<0002a43a>] [<0001bc3e>]
> [<00013b18>] [<00016196>]
> 				        [<000f4240>] [<00015f1a>]
> [<00015e42>] [<0001dcfc>]
> 				        [<0001dbf8>] [<00013ace>]
> 				Code: 4e6f 4344 e4fe 0011 06a4 0001
> 0000 0001 0000 899b
>
> The configuration of my board is :
>
> coldfire 5282
> 2M extern Flash (start at u-boot at 0xffc00000, uClinux image at
> 0xffc40000)
> 32M extern SDRAM (start at 0x00000000)
> uClinux 2.4.24-uc0
>
> Can help my anybody?, it's the right command to reboot the board?
>
> Thanks a lot.
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
>





More information about the uClinux-dev mailing list