[uClinux-dev] Kernel panic: VFS: Unable to mount root fs on 01:00

Suresh Steven Veigas suresh.veigas at amdlbct.com
Sat Aug 20 00:11:53 EDT 2005


Hi Igor,

Please find the link below, going through it may solve the problem

http://calradio.calit2.net/calradio1/Software/documentation/Find%20your%20Ro
ot%20File%20System%20with%20MTD.doc


----- Original Message -----
From: "Igor Novikov" <igor at inovikov.net>
To: "uClinux development list" <uclinux-dev at uclinux.org>
Sent: Saturday, August 20, 2005 6:06 AM
Subject: Re: [uClinux-dev] Kernel panic: VFS: Unable to mount root fs on
01:00


> Hi Sreescharan,
>
> I let you know any progress I made about the booting linux.
> I tried a few things (including blkmem ROM option, still gave me an error)
> Sreecharan Sivadevuni quote:
>
> >Hi Igor,
> >           Let me tell you I am trying to do the same
> >thing as you are trying, i.e trying to boot a uClinux
> >out of RAM, be it use RAMDisk or any file system. and
> >I too am stuck at the same point in the booting as you
> >are, needless to say I am looking out for help.
> >
> >
> >
> Then I followed the  advice from Greg
>
>  >The INITRD config option simply enables the kernel to
>  >use an init ramdisk image. It doesn't compile one in.
>  >You need to generate one, and then load it at a place
>  >that the kernel knows to find it.
>  >Regards
>  >Greg
>
> I generated RAM disk image, (I can use uncompressed one) but I dont know
> how  to make kernel to point out to it,
> when it tries to mount the file system.
> I ran kernel directly from RAM (without bootloader)
> Documentation ramdisk.txt in folder doc discuss  "Kernel Command Line
> Parameters" with some offset. How to set those
> parameters for compiled kernel?
>
>
>                      Regards,
>
>                       Igor
>
>
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org
>


Confidentiality Notice:

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at AMDLBCT or sysadmin at amdlbct.com immediately and destroy all copies of this message and any attachments.




More information about the uClinux-dev mailing list