[uClinux-dev] IXP425 DSR library 2.6.2

Vanitha vanitha at stee.stengg.com
Mon Aug 1 06:59:06 EDT 2005


Hi All,

I have compiled the Intel DSR 2.6.2 for IXP425. I am running snapgear 3.0 
distro and Access library 1.4. I am able to install the DSR modules and run 
the codelet application..IxDspcodeletApp in my ADI Coyote platform. I have 
loopbacked the LAN and WAN ethernet ports in the Coyote board. But i am not 
able to establish voice calls between the two telphones that i have 
connected to the Voice ports (J1 and J2 in the coyote board.). Is there any 
one who have already verified this..?Appreciate your inputs on this.Do i 
need to make any changes specific to the ADI Coyote board in the snapgear 
kernel


Please select telephone interface
        1: Digital T1, 4 channels
        2: Analog Narrow Band, 2 channels
        3: Analog Wide Band, 2 channels
        4: Analog Wide & Narrow Band, 1 + 1 channels
        -> 2
Set country code (1:US, 81:Japan, 86:China) -  1
Initialising NPEs...

PHY 0 configuration:
PHY Status:
    Link is Down
    Auto Negotiation Not Completed
PHY Configuration:
    Speed 10Mb/s
    Half Duplex
    Auto Negotiation Disabled

PHY 1 configuration:
PHY Status:
    Link is Down
    Auto Negotiation Not Completed
PHY Configuration:
    Speed 10Mb/s
    Half Duplex
    Auto Negotiation Disabled
PHY 0 MAC address is:   00:0e:ec:01:2a:fe
PHY 1 MAC address is:   00:0e:ac:d2:ae:cd
Rx Free pool has 100 buffers
Rtp successfully initialised.
DLcid 02060200-01
********************************************
*      Intel IXP400 DSP Software           *
*      Release 2.6.2                       *
*      Nov 17 2004, 23:07:24          *
*      Intel Corporation                   *
********************************************

[message] Entering ixHssAccInit
[message] Entering ixHssAccPCMInit
[message] Exiting ixHssAccPCMInit
[message] Entering ixHssAccPktTxInit
[message] Exiting ixHssAccPktTxInit
[message] Entering ixHssAccPktRxInit
[message] Exiting ixHssAccPktRxInit
[message] EnteringixHssAccPDMInit
PDM desc size = 40
[message] Exiting ixHssAccPDMInit
[message] Entering ixHssAccComInit
[message] Exiting ixHssAccComInit
[message] Entering ixHssAccCCMInit
[message] Exiting ixHssAccCCMInit
[message] Entering ixHssAccChanRxInit
[message] Exiting ixHssAccChanRxInit
[message] Exiting ixHssAccInit
[message] Entering ixHssAccPortInit
[message] Entering ixHssAccComPortInit
[message] Entering ixHssAccComPortConfigWrite
[message] Entering ixHssAccComPCRCreate
[message] Entering ixHssAccComPCRCreateComParamsInvalid
[message] Exiting ixHssAccComPCRCreateComParamsInvalid
[message] Entering ixHssAccComPCRCreateTxParamsInvalid
[message] Exiting ixHssAccComPCRCreateTxParamsInvalid
[message] txPCR = 0xF60B0000
[message] Exiting ixHssAccComPCRCreate
[message] Entering ixHssAccComPCRCreate
[message] Entering ixHssAccComPCRCreateComParamsInvalid
[message] Exiting ixHssAccComPCRCreateComParamsInvalid
[message] rxPCR = 0xC00A0000
[message] Exiting ixHssAccComPCRCreate
[message] Entering ixHssAccComClkCRCreate
[message] clkCR = 0x802203F
[message] Exiting ixHssAccComClkCRCreate
[message] Entering ixHssAccComFCRCreate
[message] fcr = 0xFF
[message] Exiting ixHssAccComFCRCreate
[message] Entering ixHssAccComFCRCreate
[message] fcr = 0xFF
[message] Exiting ixHssAccComFCRCreate
[message] Entering ixHssAccComHssLUTCreate
[message] LUT[0] = 3FC
[message] LUT[1] = 3FC
[message] LUT[2] = 0
[message] LUT[3] = 0
[message] LUT[4] = 0
[message] LUT[5] = 0
[message] LUT[6] = 0
[message] LUT[7] = 0
[message] Exiting ixHssAccComHssLUTCreate
[message] Entering ixHssAccComCCRCreate
[message] ccr = 0x0
[message] Exiting ixHssAccComCCRCreate
[message] ixHssAccComNpeCmdMsgCreate: 0x40000000, 0xF60B0000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000004, 0xC00A0000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000008, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4000000C, 0x0802203F
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000010, 0x000000FF
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000014, 0x000000FF
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000018, 0x000003FC
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4000001C, 0x000003FC
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000020, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000024, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000028, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4000002C, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000030, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000034, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000038, 0x000003FC
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4000003C, 0x000003FC
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000040, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000044, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000048, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4000004C, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000050, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x40000054, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] Exiting ixHssAccComPortConfigWrite
[message] ixHssAccComNpeCmdMsgCreate: 0x45000000, 0x7F7F7F7F
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x46000000, 0x08000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x52000000, 0x01000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] Entering ixHssAccComPipeInfoWrite
[message] ixHssAccComNpeCmdMsgCreate: 0x53000000, 0x04000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x55000000, 0x7F7F7F7F
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x53000001, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x55000001, 0x7F7F7F7F
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x53000002, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x55000002, 0x7F7F7F7F
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x53000003, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x55000003, 0x7F7F7F7F
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] Exiting ixHssAccComPipeInfoWrite
[message] Entering ixHssAccComPortConfigLoad
[message] ixHssAccComNpeCmdMsgCreate: 0x41000000, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageWithResponseSend
[message] SEM PEND
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] Exiting ixHssAccComPortConfigLoad
[message] Exiting ixHssAccComPortInit
[message] Exiting ixHssAccPortInit
[message] Entering ixHssAccChanConnect
[message] Entering ixHssAccCCMConnect
[message] ixHssAccComNpeCmdMsgCreate: 0x47000000, 0x01982080
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x48000000, 0x0AA00000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x49000000, 0x05140514
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4A000000, 0x01982000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] ixHssAccComNpeCmdMsgCreate: 0x4B000000, 0x04000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] Exiting ixHssAccCCMConnect
[message] Exiting ixHssAccChanConnect
[message] Entering ixHssAccChanPortEnable
[message] Entering ixHssAccCCMPortEnable
[message] ixHssAccComNpeCmdMsgCreate: 0x43000000, 0x00000000
[message] Entering ixHssAccComNpeCmdMsgSend
[message] Calling ixNpeMhMessageSend
[message] Exiting ixHssAccComNpeCmdMsgSend
[message] Exiting ixHssAccCCMPortEnable
[message] Exiting ixHssAccChanPortEnable
-------- DSP Resource Configuration -------
        Number of TDM terminations = 2
        Number of IP terminations  = 3
        Number of Player           = 3
        Number of Mixers           = 1
        Number of ports per Mixer  = 4
        Country code               = 1
-------------------------------------------
Initializing Slic's, please wait...
OSSL: Message queues createdmaxMsg = 64, maxSize = 192 in=4 out=3

ixDspCodeletDemoMenu: Entry

----------------------------------------
-      IxDspCodelet Demo Menu          -
----------------------------------------
  0 - Print Menu
  1 - Channel Setup
  2 - Channel Teardown
  3 - Show Channel Parameters
  4 - Show Resource Parameters
  5 - Set a Parameter
  6 - Caller ID Demo
  7 - Gateway and Fax Bypass Demo
  8 - 3-Way Call Demo
  9 - Player Demo
 10 - Diagnostic
 11 - System Test CLI
 12 - Exit
Please select test item - 1
Enter the channel number (1,2...; 0 for all channels) - 0

Enter the coder type - 3

<<IxDspCodeletMsgSetupAck received (ch=1, numDspReply=10, numErr=0)>>
<<IxDspCodeletMsgSetupAck received (ch=2, numDspReply=10, numErr=0)>>

After, this what should i do..I dont hear any rtp packets flowing across

Thanks

[This e-mail is confidential and may be priviledged. If you are not the
intended recipient, please kindly notify us immediately and delete the message
from your system; please do not copy or use it for any purpose, nor disclose
its contents to any other person. Thank you.]
---ST Electronics Group---




More information about the uClinux-dev mailing list