[uClinux-dev] how to config two block RAM on AT91M40800's board?

[zhuyong]

hi list:
I have problem on config two block RAM in uclinux. AT91X40 chip have on-chip
RAM and external SRAM. RAM and SRAM's address can not sequence through
config.After remap:
on-chip RAM's address:0x00000000--0x00001FFF(8KB)
external SRAM's address:0x02000000--0x021FFFFF(2MB)
but in linux kernal config->system type->set sram/flash option, only have one
block DRAM's config, what I can do next?





--http://www.eyou.com
--Îȶ¨¿É¿¿µÄµç×ÓÐÅÏä  ÓïÒôÓʼþ  Òƶ¯ÊéÇ©  ÈÕÀú·þÎñ  ÍøÂç´æ´¢...ÒÚÓÊδ¾¡

--http://vip.eyou.com
--¿ì¿ìµÇ¼ÒÚÓÊVIPÐÅÏä  ×¢²áÄúÖÐÒâµÄÓû§Ãû