[uClinux-dev] minicom from uclinux

David McCullough davidm at snapgear.com
Tue Mar 25 06:01:51 EST 2003


Jivin Andrey Butok lays it down ...
> Hello
> 
> On practice, the "tip" does not supports Harware/Software data flow control.
> Or may be, I am wrong?
> 
> Is the any other standard terminal program for uCLinux that supports it ?

The version with the dist does:

	Usage: tip [-?heonxrwcqt125678] [-s speed] [-w file] [-p tcpport] [-l
	device] [device]

			-h?     this help
			-q      quiet mode (no helpful messages)
			-1      1 stop bits (default)
			-2      2 stop bits
			-5      5 data bits
			-6      6 data bits
			-7      7 data bits
			-8      8 data bits (default)
			-e      even parity
			-o      odd parity
			-n      no parity (default)
			-c      use clocal mode (no disconnect)
			-t      translate 5 bit codes to ascii
			-x      use software flow (xon/xoff)
			-r      use hardware flow (rts/cts)
			-f      pass xon/xoff flow control to remote
			-s      baud rate (default 9600)
			-w      capture remote output to local file
			-p      bind to tcpport instead of using stdin/stdout
			-l      device to use

Cheers,
Davidm

-- 
David McCullough:    Ph: +61 7 3435 2815  http://www.SnapGear.com
davidm at snapgear.com  Fx: +61 7 3891 3630  Custom Embedded Solutions + Security



More information about the uClinux-dev mailing list