[uClinux-dev] Problem with uclinux-dist-20030305

Greg Ungerer gerg at snapgear.com
Fri Mar 21 02:23:45 EST 2003


Hi,

hn wrote:
> Great thanks to Greg for your reply about the reboot (5307/ints.c) problem(but I missed the mail, and found the reply by searching the maillist on WEB, how could this happen! :( bug of the maillist??)
> You are absolutely right: 
> The only problem is that the soft reboot does not do a real hard reset of all the peripherals.
> 
> New problem report-->
> the latest uclinux-dist-20030305 is tested not working for the MCF5249C3,
> could not pass the IDE probe and go dead there!
> ..
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
> hda: probing with STATUS(0x58) instead of ALTSTATUS(0xff)
> hda: IC35L040AVER07-0, ATA DISK drive
> hdb: probing with STATUS(0x00) instead of ALTSTATUS(0xff)
> ide0 at 50000020 on irq 0x000000a5
> hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63
> Partition check:
>  hda: [PTBL] [5005/255/63] hda1
> ..

This works for me. Have you tried other drivers?
Which kernel are you using too, 2.0.x or 2.4.x?

Regards
Greg

------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Wizard        EMAIL:  gerg at snapgear.com
SnapGear Pty Ltd                               PHONE:    +61 7 3435 2888
825 Stanley St,                                  FAX:    +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia              WEB:   www.SnapGear.com




More information about the uClinux-dev mailing list