[uClinux-dev] uclinux-elf-tools-20030314 released

thomas chen tchen at on-go.com
Sat Mar 15 16:08:00 EST 2003


since uclinux 2.4.20 just came out... is there correlation between
2.4.20 and the new tool chain.... ie do you need new tool chain in order
to get the 2.4.20 to work or vice versa?

just curious


David McCullough wrote:
> 
> Hi all,
> 
> I have put up a new release of the uClinux-elf-tools ARM and m68k toolchains
> on uClinux.org:
> 
>         http://www.uclinux.org/pub/uClinux/m68k-elf-tools/
> 
> This release uses STLport for C++ support, uClibc-0.9.19 with pthreads
> and full XIP/non-XIP applications on m68k and ARM. It still provides flat
> format shared libraries for the m68k tool chain, the arm folks will have
> to wait a while longer yet. The latest ARMulator and a working
> m68k-bdm-elf-gdb are included. The binary package is now a self
> extracting script so that it can take care of cleaning up from previous
> installations which is critical to a working toolchain.
> 
> Quite a lot of changes in this one so let me know if you encounter any
> problems using,  compiling, or installing the tools.  Be sure to read
> the README-20030314 for more info,
> 
> Cheers,
> Davidm
> 
> --
> David McCullough:    Ph: +61 7 3435 2815  http://www.SnapGear.com
> davidm at snapgear.com  Fx: +61 7 3891 3630  Custom Embedded Solutions + Security
> _______________________________________________
> uClinux-dev mailing list
> uClinux-dev at uclinux.org
> http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> This message was resent by uclinux-dev at uclinux.org



More information about the uClinux-dev mailing list