[uClinux-dev] toolchain config ?

Selvam selvam at sesl.global.sharp.co.jp
Tue Mar 4 01:02:10 EST 2003


Hi Phil, thanks.

I included the PATH for toolchain.
"make" went a little further but stopped with almost the same error.

------------------------------------
[root at KSLINUXPC linux]# make
dnsdomainname: Unknown host
arm-uclinux-gcc -D__KERNEL__ -I/home/tulika/linux/include -Wall 
-Wstrict-prototypes -O2  -fno-strict-aliasing -fno-common -pipe -g -DNO_MM 
-mapcs-32  -mtune=arm7tdmi -mshort-load-bytes -msoft-float -g 
-DUTS_MACHINE='"armnommu"' -c -o init/version.o init/version.c
arm-uclinux-gcc: installation problem, cannot exec `cc1': No such file or 
directory
<command line>: warning: "system" re-asserted
as: unrecognized option `-mapcs-32'
make: *** [init/version.o] Error 1
------------------------------------


On Tuesday 04 March 2003 08:47, Phil Wilshire wrote:
> Hi Selvam,
> This looks like a path problem.
> Make sure that the correct path to the arm-uclinux-??? tools is in your
> PATH environment.
>
> for example...
>
> export PATH=/usr/local/uclinux/bin:$PATH
>
> regards
>   Phil Wilshire
>
> Selvam wrote:
> > I'm trying to recompile the arm-ucLinux kernel
> > worked partially by ex-staffs. I'm able to run make clean
> > and make dep. However when I'm run "make"
> > (or make zImage) I'm getting the following errors:
> >
> > ----------------------------------------
> > [root at KSLINUXPC linux]# make zImage
> > arm-uclinux-gcc -D__KERNEL__ -I/home/tulika/linux/include -Wall
> > -Wstrict-prototypes -O2  -fno-strict-aliasing -fno-common -pipe -g
> > -DNO_MM -mapcs-32  -mtune=arm7tdmi -mshort-load-bytes -msoft-float -g  -c
> > -o init/main.o init/main.c
> > arm-uclinux-gcc: installation problem, cannot exec `cc1': No such file or
> > directory
> > as: unrecognized option `-mapcs-32'
> > <command line>: warning: "system" re-asserted
> > make: *** [init/main.o] Error 1
> > [root at KSLINUXPC linux]# make Image
> > arm-uclinux-gcc -D__KERNEL__ -I/home/tulika/linux/include -Wall
> > -Wstrict-prototypes -O2  -fno-strict-aliasing -fno-common -pipe -g
> > -DNO_MM -mapcs-32  -mtune=arm7tdmi -mshort-load-bytes -msoft-float -g  -c
> > -o init/main.o init/main.c
> > arm-uclinux-gcc: installation problem, cannot exec `cc1': No such file or
> > directory
> > as: unrecognized option `-mapcs-32'
> > <command line>: warning: "system" re-asserted
> > make: *** [init/main.o] Error 1
> > ------------------------------------
> >
> > I believe it's something to do with toolchain configuration,
> > but not exatly sure what it is ?
> >
> > thanks
> > SELVAM
> >
> > _______________________________________________
> > uClinux-dev mailing list
> > uClinux-dev at uclinux.org
> > http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
> > This message was resent by uclinux-dev at uclinux.org

-- 
**********************************************
SELVAM KANNIAH
TECHNOLOGY DEVELOPMENT CENTRE
SHARP ELECTRONICS (S) PTE. LTD.
TEL: 62771623, FAX: 62713855
e-mail: selvam at sesl.global.sharp.co.jp
***********************************************




More information about the uClinux-dev mailing list