[uClinux-dev] Arm Debugger

Alan Carvalho de Assis alan at unilestemg.br
Thu Aug 29 11:07:55 EDT 2002


Hi Santosh,
You will need of a JTAG interface that gdb support, as:

ARM EmbeddedICE(serial/parallel) or   EPI Jeeni(serial/Ethernet) or 
Macraigor/OCDemon(parallel) or other

Ok, sure?

Greetings,
Alan Carvalho

Cópia Santosh Bhat <sanbhat at globaledgesoft.com>:

> HI alan , Please can you narrate some more on this ? I didnot understand
> how
> to use arm-elf-gdb on my target .My board doesent have a network port to
> down load . All it has is a serial,parallel port and a jtag.
> Please let me know the ways to handle it.
> Thanx and regards
> Santosh Bhat
> ----- Original Message -----
> From: "Alan Carvalho de Assis" <alan at unilestemg.br>
> To: <uclinux-dev at uclinux.org>
> Sent: Thursday, August 29, 2002 12:23 AM
> Subject: Re: [uClinux-dev] Arm Debugger
> 
> 
> > Hi Santosh,
> > I think that you can use arm-elf-gdb!
> >
> > Have you same board of test powered by ARM7 processor?
> >
> > Greetings
> > Alan
> >
> > Cópia Santosh Bhat <sanbhat at globaledgesoft.com>:
> >
> > > Hi List ,
> > > I am planning to start the work on ARM7 Based SAMSUNG Processor .I
> want
> > > to
> > > port the Uclinux on to the target processor.
> > > Can the list please suggest the Best availbale ARM source level
> debugger
> > > ,
> > > which is cost effective and able to run on Linux Host ?
> > > My Board is Big endian and has the jtag interface.And I am using RH
> 7.1.
> > > The list members who have a very good experience in the debugging
> please
> > > suggest the best -cost effective debugger.
> > > Thanx and regards
> > > Santosh
> > >
> > >
> > > This message resent by the uclinux-dev at uclinux.org list server
> > > http://www.uClinux.org/
> > >
> >
> >
> >
> > libertas quae sera tamen
> > Software Livre
> > GNU
> > This message resent by the uclinux-dev at uclinux.org list server
> http://www.uClinux.org/
> >
> >
> 
> 
> This message resent by the uclinux-dev at uclinux.org list server
> http://www.uClinux.org/
> 



libertas quae sera tamen
Software Livre
GNU
This message resent by the uclinux-dev at uclinux.org list server http://www.uClinux.org/



More information about the uClinux-dev mailing list