[uClinux-dev] PPPd question...
davidm at snapgear.com
Tue Aug 27 17:33:29 EDT 2002
Jivin Shankar Rajendran lays it down ...
> Hi all,
> I have a ARM board running with uclinux.. In the rc file I am staring the
> pppd using the command pppd /dev/ttyS0 38400.
> from the client I am trying to connect to the EVB board through serial port
> using the following command pppd /dev/ttyS0 38400.
> I am expecting the following line from my pppd but it is not giving this
> output. can you please give me some suggestion.
> using interface ppp0
> connect: ppp0 <--> /dev/ttyS0
> local IP address 188.8.131.52
> Remote IP address 184.108.40.206
> do i need to change any settings.. ?
Check in your syslog.
David McCullough: Ph: +61 7 3435 2815 http://www.SnapGear.com
davidm at snapgear.com Fx: +61 7 3891 3630 Custom Embedded Solutions + Security
This message resent by the uclinux-dev at uclinux.org list server http://www.uClinux.org/
More information about the uClinux-dev