[uClinux-dev] uCLinux 2.4 Booting Problem

Matthias Schoeldgen uclinux at schoeldgen.de
Fri Aug 9 03:54:48 EDT 2002


Hi Rajendra Rajguru!

This is an FAQ and has been handled a dozen times in this list: You are
using the wrong genromfs. Make sure you are using genromfs 0.5.1 or
higher. The wrong genromfs is unable to create correct /dev nodes and so
you have no /dev/console entry.

Greetings 
matthias

Rajendra Rajguru wrote:
> 
> Hi All,
> 
>          I am using uCLinux2.4.17 for my Lineo ucSimm Board. I made appropriate changes in ./vendor/Lineo/uCsimm/rc file as per my Network to create image.bin and Download that image on my Board. But after booting my image, i am not able to get console for I/O , ( I mean Minicom , as a console).
> 
>         After Booting it halts at
> 
> Warning: unable to open intitial console
> eth0: using half duplex 10Base-T (RJ-45)
> 
> and it stops there only.
> 
> When I ping my board, it responds, but I am not able to use it via Telnet also, though using telnet I get messegs like Coonected , but it doesn't give me login Prompt.
> 
> Is there anyone to help me out?
> 
> Regards,
> Kumar.
> --
> __________________________________________________________
> Sign-up for your own FREE Personalized E-mail at Mail.com
> http://www.mail.com/?sr=signup
> 
> This message resent by the uclinux-dev at uclinux.org list server http://www.uClinux.org/
This message resent by the uclinux-dev at uclinux.org list server http://www.uClinux.org/



More information about the uClinux-dev mailing list